Home | Ezine | Forums | Links | Contact
NitroExpress.com: Rawbome Martini ID Help

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

DarylS
.700 member


Reged: 10/08/05
Posts: 26516
Loc: Beautiful British Columbia, Ca...
Re: Rawbome Martini ID Help
      23/10/20 03:31 AM

I agree, there is a headspace problem with that ammo. Now, if there is still a headspace problem with factory commercial hunting ammo, then it is a problem that should be addressed.
A .303 groove dia. is a serious difference from the nominal .311" to .315" of most .303's I've known. That is a problem,
but only if the chamber neck will not allow the case neck to expand and release the bullet. In the first case fired, the primer itself shows there is likely enough room provided for this. A simple test is to insert a .303" bullet into a fired case mouth. If it goes in easily, there is sufficient room to safely fire oversized bullets.

Saami suggested headspace is set for maximum headspace at .006", while I think the CIP laws are for a max. of .307".

This rifle's first shot displays much more than that - looking like .025", maybe .030". That is excessive and why the cases are attempting to separate.

The first firing shows the case held "mostly" in the chamber until the pressure dropped. That there is a slight 'ring' shows there was some movement to the rear, thus the amount the primer is protruding is not the full value of the headspace slop.
The second case shows more stretch at the web and thus the re-seated primer is flatter.
The third case shows even more stretch and the unsupported primer could not withstand the pressure against the very end of the firing pin still and thus pierced.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Rawbome Martini ID Help DoubleD 18/10/20 02:53 PM
. * * Re: Rawbome Martini ID Help HuviusModerator   18/10/20 03:57 PM
. * * Re: Rawbome Martini ID Help DoubleD   18/10/20 10:50 PM
. * * Re: Rawbome Martini ID Help greenshoots   19/10/20 12:23 AM
. * * Re: Rawbome Martini ID Help 93x64mm   19/10/20 09:22 AM
. * * Re: Rawbome Martini ID Help DoubleD   19/10/20 10:19 AM
. * * Re: Rawbome Martini ID Help 93x64mm   19/10/20 10:47 PM
. * * Re: Rawbome Martini ID Help DoubleD   19/10/20 11:39 PM
. * * Re: Rawbome Martini ID Help Ripp   20/10/20 05:32 AM
. * * Re: Rawbome Martini ID Help DoubleD   22/10/20 04:28 AM
. * * Re: Rawbome Martini ID Help 93x64mm   22/10/20 11:07 PM
. * * Re: Rawbome Martini ID Help DoubleD   23/10/20 03:32 AM
. * * Re: Rawbome Martini ID Help DarylS   23/10/20 03:31 AM
. * * Re: Rawbome Martini ID Help DarylS   23/10/20 03:33 AM
. * * Re: Rawbome Martini ID Help DoubleD   23/10/20 03:43 AM
. * * Re: Rawbome Martini ID Help DoubleD   23/10/20 03:49 AM
. * * Re: Rawbome Martini ID Help DoubleD   27/10/20 12:37 AM
. * * Re: Rawbome Martini ID Help DoubleD   27/10/20 07:40 AM
. * * Re: Rawbome Martini ID Help DoubleD   19/11/20 12:20 PM
. * * Re: Rawbome Martini ID Help 93x64mm   19/11/20 06:00 PM
. * * Re: Rawbome Martini ID Help Tom_H   20/11/20 09:45 AM
. * * Re: Rawbome Martini ID Help DarylS   20/11/20 12:42 PM
. * * Re: Rawbome Martini ID Help DoubleD   21/11/20 06:06 AM
. * * Re: Rawbome Martini ID Help DoubleD   21/11/20 06:08 AM
. * * Re: Rawbome Martini ID Help Tom_H   21/11/20 09:58 AM
. * * Re: Rawbome Martini ID Help DoubleD   21/11/20 11:58 AM
. * * Re: Rawbome Martini ID Help DoubleD   25/08/21 12:45 AM
. * * Re: Rawbome Martini ID Help DarylS   19/11/20 12:41 PM

Extra information
0 registered and 50 anonymous users are browsing this forum.

Moderator:  Huvius 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 7805

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved