Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: DORLEAC on Schultz & Larsen 65DL

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

eagle27
.400 member

Reged: 24/01/09
Posts: 1165
Loc: Rolleston, Christchurch, New Z...

Re: DORLEAC on Schultz & Larsen 65DL
10/08/20 07:16 PM

Very nice and finally so nice to see a scope mounted as it should be, as low as possible. I used an M65 and then an M60 S&L rifle, both chambered for the 7x61 S&H magnum cartridge, for several decades of hunting and had a 6X Kahles scope mounted in low 26mm original Weaver rings on Weaver bases. Had to take a small scallop out of the chamber taper on the S&L barrel which had a longer taper than that on the Lothar barrel to give slight clearance to the Kahles objective bell. The 26" S&L factory barrels were superb as were the triggers, and the actions as smooth as glass.

The action well suited the belted magnum case. I don't think I have ever seen a factory rifle so perfectly put together, as smooth to operate and as accurate. Look at that massive lockup, just can't be beat.

Great workmanship to create the custom job you have but you did have the best to work with after all.

Post Extras

Entire topic
Subject	Posted by	Posted on
DORLEAC on Schultz & Larsen 65DL	DORLEAC	10/08/20 04:06 AM
Re: DORLEAC on Schultz & Larsen 65DL	NitroX	10/08/20 02:30 PM
Re: DORLEAC on Schultz & Larsen 65DL	Homer	10/08/20 05:06 PM
Re: DORLEAC on Schultz & Larsen 65DL	eagle27	10/08/20 07:16 PM
Re: DORLEAC on Schultz & Larsen 65DL	PatagonHunter	10/08/20 11:04 PM
Re: DORLEAC on Schultz & Larsen 65DL	Louis	16/08/20 05:07 AM
Re: DORLEAC on Schultz & Larsen 65DL	DORLEAC	17/08/20 03:48 PM
Re: DORLEAC on Schultz & Larsen 65DL	NitroX	18/08/20 03:10 PM
Re: DORLEAC on Schultz & Larsen 65DL	Louis	18/08/20 04:01 AM
Re: DORLEAC on Schultz & Larsen 65DL	Rule303	18/08/20 09:20 AM
Re: DORLEAC on Schultz & Larsen 65DL	DarylS	10/08/20 07:38 AM
Re: DORLEAC on Schultz & Larsen 65DL	93x64mm	10/08/20 08:10 AM
Re: DORLEAC on Schultz & Larsen 65DL	vykkagur	10/08/20 10:06 AM

Extra information

0 registered and 66 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3666

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact