Home | Ezine | Forums | Links | Contact
NitroExpress.com: 375 h&h

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Forum Photos & Archive

Rule303
.416 member


Reged: 05/07/09
Posts: 4907
Loc: Woodford Qld
Re: 375 h&h
      18/07/20 06:07 PM

Ahh the barrel length question. My 416 Rigby a CZ550 has a 25inch barrel and a 15" length of pull and is too long overall in thick tight scrub. Take a couple of inches off overall length and it would not be to bad.

For a 375 H&H I would not go below 22". I had a bloke on a bench next to me with a 375 H&H with an 18" barrel. It was horrendous. When he shot it showed a reading on my Chrony. Unburnt powder a lot of which was spewed onto my bench. I would think with the amount of unburnt powder on my bench after each shot even a 20" barrel will produce unburnt powder.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 375 h&h ducmarc 01/01/20 11:48 AM
. * * Re: 375 h&h pjaln   05/01/20 02:07 PM
. * * Re: 375 h&h Rule303   05/01/20 05:43 PM
. * * Re: 375 h&h Ripp   05/01/20 05:54 PM
. * * Re: 375 h&h Postman   05/01/20 11:02 PM
. * * Re: 375 h&h Ripp   06/01/20 01:35 AM
. * * Re: 375 h&h ducmarc   14/01/20 11:43 AM
. * * Re: 375 h&h NitroXAdministrator   15/01/20 02:15 PM
. * * Re: 375 h&h NitroXAdministrator   15/01/20 02:22 PM
. * * Re: 375 h&h Wanabebwana   18/07/20 02:18 PM
. * * Re: 375 h&h Rule303   18/07/20 06:07 PM
. * * Re: 375 h&h 93x64mm   19/07/20 09:29 AM
. * * Re: 375 h&h Ripp   15/01/20 01:29 AM
. * * Re: 375 h&h DarylS   15/01/20 04:21 AM
. * * Re: 375 h&h Postman   15/01/20 09:21 AM
. * * Re: 375 h&h Ripp   15/01/20 09:31 AM
. * * Re: 375 h&h ducmarc   15/01/20 12:15 PM
. * * Re: 375 h&h Ripp   15/01/20 12:20 PM
. * * Re: 375 h&h ducmarc   14/01/20 11:44 AM
. * * Re: 375 h&h NitroXAdministrator   05/01/20 02:41 PM

Extra information
0 registered and 3 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 7285

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved