Home | Ezine | Forums | Links | Contact
NitroExpress.com: Powder Coating and the Paradox

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

470evans
.333 member


Reged: 30/03/05
Posts: 278
Loc: Texas, USA
Re: Powder Coating and the Paradox
      10/06/20 12:56 AM



I do it the following way:

- Cast the bullets

- drop them in a plastic container with a few tablespoons of powder

- close the lid, swirl till I get tired of swirling, maybe 30 seconds

- dump the bullets out on a wire screen over another plastic container to let the excess powder drop off and be reused

- dump the bullets on parchment paper and put in the toaster oven at 400 degrees for 10 min (you will need a separate oven for this, don't use an oven you cook food with)

- size the bullets after powder coating

There are different ways I have read people do it but they all follow the basic method.

One thing I have read that is consistent is to use a plastic container to swirl that has the triangle with the "5" inside of. It apparently denotes a type of plastic that generates the required static.

The RAL powders from Powder by the Pound are what I used. There are multiple colors to pick from.



Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Powder Coating and the Paradox 470evans 08/06/20 10:39 PM
. * * Re: Powder Coating and the Paradox tinkerModerator   09/06/20 12:09 AM
. * * Re: Powder Coating and the Paradox rigbymauser   09/06/20 01:48 AM
. * * Re: Powder Coating and the Paradox DarylS   09/06/20 02:05 AM
. * * Re: Powder Coating and the Paradox 470evans   09/06/20 04:06 AM
. * * Re: Powder Coating and the Paradox 470evans   09/06/20 04:11 AM
. * * Re: Powder Coating and the Paradox DarylS   09/06/20 02:02 PM
. * * Re: Powder Coating and the Paradox NitroXAdministrator   09/06/20 09:50 PM
. * * Re: Powder Coating and the Paradox 93x64mm   09/06/20 10:25 PM
. * * Re: Powder Coating and the Paradox tinkerModerator   09/06/20 11:25 PM
. * * Re: Powder Coating and the Paradox 470evans   10/06/20 12:48 AM
. * * Re: Powder Coating and the Paradox SwedenParadox   24/07/20 10:37 PM
. * * Re: Powder Coating and the Paradox 470evans   10/06/20 12:56 AM
. * * Re: Powder Coating and the Paradox rigbymauser   10/06/20 01:51 AM
. * * Re: Powder Coating and the Paradox DarylS   10/06/20 01:59 AM
. * * Re: Powder Coating and the Paradox NitroXAdministrator   10/06/20 05:38 PM
. * * Re: Powder Coating and the Paradox dearmer   07/07/20 11:20 PM
. * * Re: Powder Coating and the Paradox DarylS   08/07/20 02:17 AM
. * * Re: Powder Coating and the Paradox iomskp   12/07/20 12:06 AM

Extra information
0 registered and 45 anonymous users are browsing this forum.

Moderator:  tinker 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5000

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved