Home | Ezine | Forums | Links | Contact
NitroExpress.com: Purdy 450 3 1/4 BPE

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

MikeRowe
.333 member


Reged: 23/11/11
Posts: 478
Loc: Arkansas, USA
Re: Purdy 450 3 1/4 BPE
      09/10/19 10:08 AM

If it's a 3 3/4 dram rifle around 110 grains of Olde Eynsford 1 1/2F will get you close.
Swiss doesn't have enough oomph.
Use a .450 dia paper wrapped bullet 1 in 15 to 20 would be good and about 300 to 310 grains.
Don't worry about measuring the bore - it'll fill it. Grease cookie 3/16".

The rifle was probably regulated with 270's so the above load may shoot a little over the bead, but it'll be very close at 100 yards.

The load will tell you what to do.

Forget NFB's unless you want to try ringing a chamber.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Purdy 450 3 1/4 BPE kzmd1860 09/10/19 01:38 AM
. * * Re: Purdy 450 3 1/4 BPE tinker   09/10/19 01:42 AM
. * * Re: Purdy 450 3 1/4 BPE kzmd1860   09/10/19 05:22 AM
. * * Re: Purdy 450 3 1/4 BPE tinker   09/10/19 05:57 AM
. * * Re: Purdy 450 3 1/4 BPE 3DogMike   09/10/19 06:57 AM
. * * Re: Purdy 450 3 1/4 BPE MikeRowe   09/10/19 10:08 AM
. * * Re: Purdy 450 3 1/4 BPE kzmd1860   10/10/19 08:10 AM
. * * Re: Purdy 450 3 1/4 BPE 3DogMike   10/10/19 11:34 AM
. * * Re: Purdy 450 3 1/4 BPE kzmd1860   10/10/19 11:56 AM
. * * Re: Purdy 450 3 1/4 BPE tinker   10/10/19 12:11 PM
. * * Re: Purdy 450 3 1/4 BPE 3DogMike   10/10/19 02:32 PM
. * * Re: Purdy 450 3 1/4 BPE DarylS   10/10/19 05:45 PM
. * * Re: Purdy 450 3 1/4 BPE Huvius   11/10/19 01:35 AM
. * * Re: Purdy 450 3 1/4 BPE 93x64mm   11/10/19 07:07 AM
. * * Re: Purdy 450 3 1/4 BPE Huvius   11/10/19 08:40 AM
. * * Re: Purdy 450 3 1/4 BPE MikeRowe   11/10/19 10:02 AM
. * * Re: Purdy 450 3 1/4 BPE TH44   11/10/19 08:39 AM
. * * Re: Purdy 450 3 1/4 BPE DarylS   09/10/19 06:52 AM

Extra information
0 registered and 55 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5250

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved