Home | Ezine | Forums | Links | Contact
NitroExpress.com: 450 BPE Brass Fitment Issues

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

vandeusenps
.224 member


Reged: 02/01/13
Posts: 31
Loc: Illinois
Re: 450 BPE Brass Fitment Issues
      18/09/19 11:09 AM

Thanks for the replies...I smoked the brass tonight and put them in the chamber. Rub marks are about 1.5” from the head. Hopefully the lee sizer can iron out the area enough to chamber a round so I can at least shoot it a few times while I wait on a custom sizing die.

I will probably go with Hornady. Turnaround time with them is 3 to 4 months. I’ve always had good luck with CH4D, I recently had them make a set of 297/250 Rook for me, they are great dies, but turnaround from them was just shy of 2 years.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 450 BPE Brass Fitment Issues vandeusenps 17/09/19 11:39 AM
. * * Re: 450 BPE Brass Fitment Issues dracb   17/09/19 05:22 PM
. * * Re: 450 BPE Brass Fitment Issues vandeusenps   17/09/19 08:04 PM
. * * Re: 450 BPE Brass Fitment Issues 8borerifle   17/09/19 10:01 PM
. * * Re: 450 BPE Brass Fitment Issues 3DogMike   17/09/19 12:08 PM
. * * Re: 450 BPE Brass Fitment Issues vandeusenps   17/09/19 12:42 PM
. * * Re: 450 BPE Brass Fitment Issues DoubleD   17/09/19 10:34 PM
. * * Re: 450 BPE Brass Fitment Issues Huvius   18/09/19 02:53 AM
. * * Re: 450 BPE Brass Fitment Issues degoins   18/09/19 02:57 AM
. * * Re: 450 BPE Brass Fitment Issues vandeusenps   18/09/19 03:07 AM
. * * Re: 450 BPE Brass Fitment Issues 3DogMike   18/09/19 04:41 AM
. * * Re: 450 BPE Brass Fitment Issues CptCurlAdministrator   18/09/19 08:08 AM
. * * Re: 450 BPE Brass Fitment Issues 3DogMike   18/09/19 09:24 AM
. * * Re: 450 BPE Brass Fitment Issues DarylS   18/09/19 09:52 AM
. * * Re: 450 BPE Brass Fitment Issues vandeusenps   18/09/19 11:09 AM
. * * Re: 450 BPE Brass Fitment Issues Wayne59   18/09/19 11:38 AM
. * * Re: 450 BPE Brass Fitment Issues 3DogMike   18/09/19 12:08 PM
. * * Re: 450 BPE Brass Fitment Issues OahuKaneohe   18/09/19 12:53 PM
. * * Re: 450 BPE Brass Fitment Issues CptCurlAdministrator   18/09/19 07:51 PM
. * * Re: 450 BPE Brass Fitment Issues vandeusenps   18/09/19 08:34 PM
. * * Re: 450 BPE Brass Fitment Issues CptCurlAdministrator   19/09/19 12:45 AM
. * * Re: 450 BPE Brass Fitment Issues degoins   19/09/19 02:48 AM
. * * Re: 450 BPE Brass Fitment Issues OahuKaneohe   19/09/19 05:01 AM
. * * Re: 450 BPE Brass Fitment Issues OahuKaneohe   19/09/19 05:07 AM
. * * Re: 450 BPE Brass Fitment Issues vandeusenps   20/09/19 09:10 PM

Extra information
0 registered and 452 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 10836

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved