Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 6.5X54 mm load

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

93x64mm
.416 member

Reged: 07/12/11
Posts: 4203
Loc: Nth QLD Australia

Re: 6.5X54 mm load
06/08/19 06:34 AM

Don, I would definitely do the bullet in the fired case trick first; as Daryl stated this could be the clincher & most likely culprit.
I would like to make a further suggestion here though, I think you need a good set of vernier calipers & a chronograph or at least access to these before you go much further.
After that neck test & if a smoked dummy round proves that you OAL is okay to work through the magazine without binding yet not overly long to contact the rifling then a chamber cast will definitely be in order!
I'd still watch if the crimp you are applying doesn't 'buckle' the case - it could be a cause as well?
Keep us informed please.

Post Extras

Entire topic
Subject	Posted by	Posted on
6.5X54 mm load	DonZ	05/08/19 06:38 AM
Re: 6.5X54 mm load	DarylS	05/08/19 09:37 AM
Re: 6.5X54 mm load	93x64mm	06/08/19 06:34 AM
Re: 6.5X54 mm load	DarylS	06/08/19 02:08 PM
Re: 6.5X54 mm load	Waidmannsheil	06/08/19 04:24 PM
Re: 6.5X54 mm load	DonZ	07/08/19 02:01 AM
Re: 6.5X54 mm load	DonZ	07/08/19 04:14 AM
Re: 6.5X54 mm load	93x64mm	07/08/19 06:08 AM
Re: 6.5X54 mm load	Hook	07/08/19 02:21 PM
Re: 6.5X54 mm load	DarylS	07/08/19 02:00 AM

Extra information

0 registered and 74 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3218

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact