Home | Ezine | Forums | Links | Contact
NitroExpress.com: M1910 Finally here (and some questions)!

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

Waidmannsheil
.400 member


Reged: 19/04/13
Posts: 2363
Loc: Melbourne Australia
Re: M1910 Finally here (and some questions)!
      28/07/19 12:11 PM

Don, I have the CH4D dies for my 9.5x57MS, they are good and they also includes an expander which brings the neck up to parallel, however doing it in one pass is too much IMO. I would have another slightly smaller expander made to increase the neck in two steps, that is what I have done. I also had the expander coated in a titanium nitride coating, this one is called Zenit. It is a proprietary coating from the German company Guhring who are the worlds biggest manufacturers of carbide drills. Zenit has the lowest coefficient of friction in the range that I can get here in Australia. In the US Guhring has several other coatings with an even lower coefficient of friction. I coat all the expander buttons on the die sets with such and you can feel the difference and see it as well as the necks have no marks at all inside after sizing. Just make sure that you polish the ball to a very high finish before coating.

Matt.

--------------------
There is nothing wrong with vegetarian food, so long as there is meat with it.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* M1910 Finally here (and some questions)! DonZ 27/06/19 06:47 AM
. * * Re: M1910 Finally here (and some questions)! Rothhammer1   27/06/19 10:43 AM
. * * Re: M1910 Finally here (and some questions)! DonZ   27/06/19 01:52 PM
. * * Re: M1910 Finally here (and some questions)! Louis   28/06/19 03:08 AM
. * * Re: M1910 Finally here (and some questions)! DonZ   27/07/19 04:27 AM
. * * Re: M1910 Finally here (and some questions)! Rothhammer1   27/07/19 06:46 PM
. * * Re: M1910 Finally here (and some questions)! DonZ   28/07/19 03:36 AM
. * * Re: M1910 Finally here (and some questions)! Waidmannsheil   28/07/19 12:11 PM
. * * Re: M1910 Finally here (and some questions)! DonZ   28/07/19 05:57 PM
. * * Re: M1910 Finally here (and some questions)! Rothhammer1   28/07/19 11:02 PM
. * * Re: M1910 Finally here (and some questions)! Louis   28/07/19 06:45 PM
. * * Re: M1910 Finally here (and some questions)! DonZ   05/08/19 05:56 AM
. * * Re: M1910 Finally here (and some questions)! Rothhammer1   28/07/19 10:28 AM
. * * Re: M1910 Finally here (and some questions)! 93x64mm   28/07/19 07:35 AM
. * * Re: M1910 Finally here (and some questions)! eagle27   28/07/19 09:20 AM
. * * Re: M1910 Finally here (and some questions)! DarylS   28/07/19 03:45 AM
. * * Re: M1910 Finally here (and some questions)! DarylS   28/07/19 03:31 AM
. * * Re: M1910 Finally here (and some questions)! DonZ   28/06/19 01:43 PM
. * * Re: M1910 Finally here (and some questions)! Rothhammer1   29/06/19 12:44 AM
. * * Re: M1910 Finally here (and some questions)! DonZ   09/07/19 04:50 AM
. * * Re: M1910 Finally here (and some questions)! Rothhammer1   11/07/19 09:06 PM
. * * Re: M1910 Finally here (and some questions)! kuduae   10/07/19 10:40 PM
. * * Re: M1910 Finally here (and some questions)! Rothhammer1   11/07/19 09:17 PM
. * * Re: M1910 Finally here (and some questions)! DonZ   11/07/19 03:35 AM
. * * Re: M1910 Finally here (and some questions)! Rothhammer1   27/06/19 09:39 AM
. * * Re: M1910 Finally here (and some questions)! NitroXAdministrator   27/06/19 07:17 AM
. * * Re: M1910 Finally here (and some questions)! xausa   27/06/19 08:00 AM

Extra information
0 registered and 34 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5612

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved