Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: M1910 Finally here (and some questions)!

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

DarylS
.700 member

Reged: 10/08/05
Posts: 27005
Loc: Beautiful British Columbia, Ca...

Re: M1910 Finally here (and some questions)!
28/07/19 03:31 AM

When making brass up, one should neck them straight, THEN neck down to hold the bullet, placing the shoulder at the appropriate location. This will produce a case that is as close as any factory loaded round for this calibre.
As noted before, the 9.5x57's case dimensions, with the .468' base and .455" shoulder, virtually match the Ackley Improved 57mm case.
This is likely beyond a non-loader to comprehend.

Here is the case making sequence, but in this instance, I am using .30/06 brass, which is 63/4mm long, not 57mm. It is the same process.
The second case, is a .30/06 (or .35 Whelen) case necked straight. The third case is straight case necked to position the shoulder in the correct location. The 4th case is the necked case fireformed. The last two cases are freshly loaded ammo with 270gr. Barnes TSX and 300gr.Hornady Interbond bullets.

I used the same process for making brass for my 9.3x57, although I used 8x57 brass. Note the 9.3x57 has a small shoulder diameter of around .440".

This came up on a google search. Interesting as it is a post by me, many years ago on another forum about loading the 9.3x57.
http://www.outdoorsmenforum.ca/showthread.php?t=76602

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
M1910 Finally here (and some questions)!	DonZ	27/06/19 06:47 AM
Re: M1910 Finally here (and some questions)!	Rothhammer1	27/06/19 10:43 AM
Re: M1910 Finally here (and some questions)!	DonZ	27/06/19 01:52 PM
Re: M1910 Finally here (and some questions)!	Louis	28/06/19 03:08 AM
Re: M1910 Finally here (and some questions)!	DonZ	27/07/19 04:27 AM
Re: M1910 Finally here (and some questions)!	Rothhammer1	27/07/19 06:46 PM
Re: M1910 Finally here (and some questions)!	DonZ	28/07/19 03:36 AM
Re: M1910 Finally here (and some questions)!	Waidmannsheil	28/07/19 12:11 PM
Re: M1910 Finally here (and some questions)!	DonZ	28/07/19 05:57 PM
Re: M1910 Finally here (and some questions)!	Rothhammer1	28/07/19 11:02 PM
Re: M1910 Finally here (and some questions)!	Louis	28/07/19 06:45 PM
Re: M1910 Finally here (and some questions)!	DonZ	05/08/19 05:56 AM
Re: M1910 Finally here (and some questions)!	Rothhammer1	28/07/19 10:28 AM
Re: M1910 Finally here (and some questions)!	93x64mm	28/07/19 07:35 AM
Re: M1910 Finally here (and some questions)!	eagle27	28/07/19 09:20 AM
Re: M1910 Finally here (and some questions)!	DarylS	28/07/19 03:45 AM
Re: M1910 Finally here (and some questions)!	DarylS	28/07/19 03:31 AM
Re: M1910 Finally here (and some questions)!	DonZ	28/06/19 01:43 PM
Re: M1910 Finally here (and some questions)!	Rothhammer1	29/06/19 12:44 AM
Re: M1910 Finally here (and some questions)!	DonZ	09/07/19 04:50 AM
Re: M1910 Finally here (and some questions)!	Rothhammer1	11/07/19 09:06 PM
Re: M1910 Finally here (and some questions)!	kuduae	10/07/19 10:40 PM
Re: M1910 Finally here (and some questions)!	Rothhammer1	11/07/19 09:17 PM
Re: M1910 Finally here (and some questions)!	DonZ	11/07/19 03:35 AM
Re: M1910 Finally here (and some questions)!	Rothhammer1	27/06/19 09:39 AM
Re: M1910 Finally here (and some questions)!	NitroX	27/06/19 07:17 AM
Re: M1910 Finally here (and some questions)!	xausa	27/06/19 08:00 AM

Extra information

0 registered and 78 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 6330

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved