Home | Ezine | Forums | Links | Contact
NitroExpress.com: Pitted chambers - a possible solution ?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

theprof1
.224 member


Reged: 01/02/19
Posts: 33
Loc: Queensland
Pitted chambers - a possible solution ?
      19/07/19 06:55 PM

Warning, this is a silly idea of mine so please feel free to call me a dangerous nutter.
Some years ago I had a .500 3" BP Jeffery double, the right barrel had a noticeable pit about half way down the chamber at about 2 o'clock viewed from the breech. I tolerated this for the life of the rifle while I was it's custodian. When a load seemed to get close to maximum the brass would acquire a small raised dimple at the pit location, I then backed off in my regulation loads. I have often wondered if a good clean of the pit, with Hydrochloric acid - which I used to use for stripping old barrel browning when it had gone beyond cleaning up and needed re browning.
My thought was a small deposit of dental amalgam ( mix of mercury, silver, tin and copper). This stuff is tough takes years of gnawing bones to break up fillings. I would be softer than the chamber steel so over filling could be honed / lapped out with little effect on the steel. It would be incompressible and hard. There may be more effective ways of rescuing a chamber in which extraction becomes difficult, but I have been out of gunsmithing for years. Amalgam doesnt seem very popular these days as there are many more painless dental filling materials these days, perhaps it may not even be used any more but some old near retired dentist may be persuaded to dust of his amalgamating equipment and try it on a pit?
All comments welcome.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Pitted chambers - a possible solution ? theprof1 19/07/19 06:55 PM
. * * Re: Pitted chambers - a possible solution ? Chavez   24/08/19 04:15 AM
. * * Re: Pitted chambers - a possible solution ? tinker   24/08/19 11:07 AM
. * * Re: Pitted chambers - a possible solution ? Juglansregia   23/07/19 04:45 PM
. * * Re: Pitted chambers - a possible solution ? theprof1   23/07/19 05:51 PM
. * * Re: Pitted chambers - a possible solution ? Juglansregia   23/07/19 07:34 PM
. * * Re: Pitted chambers - a possible solution ? Waidmannsheil   23/07/19 08:13 PM
. * * Re: Pitted chambers - a possible solution ? theprof1   23/07/19 08:27 PM
. * * Re: Pitted chambers - a possible solution ? tinker   23/07/19 11:23 PM
. * * Re: Pitted chambers - a possible solution ? tinker   19/07/19 11:38 PM
. * * Re: Pitted chambers - a possible solution ? theprof1   20/07/19 12:05 AM
. * * Re: Pitted chambers - a possible solution ? DarylS   20/07/19 12:19 AM
. * * Re: Pitted chambers - a possible solution ? theprof1   20/07/19 12:26 AM
. * * Re: Pitted chambers - a possible solution ? Vladymere   20/07/19 07:53 AM
. * * Re: Pitted chambers - a possible solution ? tinker   20/07/19 08:02 AM
. * * Re: Pitted chambers - a possible solution ? theprof1   20/07/19 09:22 AM
. * * Re: Pitted chambers - a possible solution ? BillG500   20/07/19 12:25 PM
. * * Re: Pitted chambers - a possible solution ? DarylS   20/07/19 03:07 PM
. * * Re: Pitted chambers - a possible solution ? tinker   20/07/19 03:41 PM
. * * Re: Pitted chambers - a possible solution ? Huvius   21/07/19 04:20 AM
. * * Re: Pitted chambers - a possible solution ? tinker   21/07/19 05:04 AM
. * * Re: Pitted chambers - a possible solution ? BillG500   21/07/19 07:50 AM
. * * Re: Pitted chambers - a possible solution ? tinker   21/07/19 09:18 AM
. * * Re: Pitted chambers - a possible solution ? Postman   21/07/19 11:20 AM
. * * Re: Pitted chambers - a possible solution ? tinker   21/07/19 11:31 AM
. * * Re: Pitted chambers - a possible solution ? theprof1   21/07/19 12:44 PM
. * * Re: Pitted chambers - a possible solution ? tinker   21/07/19 01:36 PM
. * * Re: Pitted chambers - a possible solution ? DarylS   21/07/19 03:48 PM
. * * Re: Pitted chambers - a possible solution ? Postman   21/07/19 10:29 PM
. * * Re: Pitted chambers - a possible solution ? DarylS   22/07/19 01:24 AM
. * * Re: Pitted chambers - a possible solution ? DoubleD   22/07/19 09:32 AM
. * * Re: Pitted chambers - a possible solution ? tinker   22/07/19 03:35 PM
. * * Re: Pitted chambers - a possible solution ? DarylS   23/07/19 01:41 AM
. * * Re: Pitted chambers - a possible solution ? DarylS   22/07/19 01:24 PM
. * * Re: Pitted chambers - a possible solution ? eagle27   21/07/19 12:39 PM
. * * Re: Pitted chambers - a possible solution ? 93x64mm   21/07/19 08:37 AM
. * * Re: Pitted chambers - a possible solution ? tinker   21/07/19 09:10 AM
. * * Re: Pitted chambers - a possible solution ? tinker   20/07/19 12:51 PM
. * * Re: Pitted chambers - a possible solution ? BillG500   20/07/19 02:50 PM

Extra information
0 registered and 13 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 7830

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved