In reply to:

---

But you do not make bullets for the 505 Gibbs

---

Ever set of dies cost me 1250.00 pre set
for the Hydro Swage. I do get a bit of a discount on the dies but when i order a set of die i would like to have someone to buy the bullet's from me

If someone wants me to make them somthing i don't make
we email back and forth the person sends me a drawing of what thay want in as far a -> Taper . Angle . type of Meplat
or type of point or round nose or what ever he or she would like to see and shoot in a bullet i call Richard Corbin
and talk a bit with him i may even drive over to richard House and go over the drawings of the bullet with him
and spend the day .

Then i would get back with the person and see if he or she want to go ahead with me making the bullet's

if the presons ready and willing to buy atleast 500 bullet's
i call richard and he makes the swage die set up that can take up to 3 months .
When i get the dies i make the first batch of bullet's
normaly 5 or 10 and send them out to the person
he or she gets a chance to try them out before we go farther
it's it all fine and dandy i make up the bullet's the person send the check and i send out the bullet's

Now on the 505 Gibb's is there somthing diffrent you are looking for .I dont copy other companys bullet's
Thay sell theres and i sell mine.
If you have somthing you would like me to look at send me a email and will talk.

Some time back i got together with a man name Bill Warren
about making a 9.3 .366 diamter VLD rebaited boattail's
for his double barrel 9.3x74r which is somthing no one makes
or supplys. i took that job on becouse it was somthing no one had done .

Is there somthing unique i could do for you for your 505 gibbs.

Hollow pointed boattails ? Like i tell everyone .
It's your dream let me make it happen for you

Pottsy

--------------------
Owner PA Bullet's

Post Extras