Home | Ezine | Forums | Links | Contact
NitroExpress.com: Questions about Model 1900 M-S

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

tact1
.224 member


Reged: 24/07/17
Posts: 29
Loc: Bahama, North Carolina USA
Re: Questions about Model 1900 M-S
      03/04/19 08:38 AM

I can see the Nitro Proof mark as above but anything else must be below the stock line. The screw to take it down is so narrow and shallow I need to cut a bit to take it out. It has been reblued at some time and this may have erased some marks. On the receiver I can make out a crown over N proof mark and to the right of that is St m g. I slugged the bore with a soft lead slug and it has a .326 groove diameter and .3085 land diameter, 4 lands and grooves.
I was lucky at an auction recently and scored 4 boxes of Western 8.56 M-S ammo, 200 gr. soft point. The last box I had split when I started shooting them so I stopped, pulled the bullets, punched the primer out, and annealed the cases. The splitting stopped. With the ammo I just bought I started by pulling the bullets and keeping the powder which looked fresh enough to shoot, punched the primers and annealed the cases. Luckily, all 4 boxes were the same lot number. I weighed each charge and got an average of 49.4 gr. of what looked like IMR 4350. I will re-assemble the rounds with a fresh primer and see how they do. I got all 4 boxes along with a 25 round box of shotgun shells and 3 5-round boxes of slugs, shipped for $56. I am tickled to have 80 original Lubaloy soft-nose bullets and new brass.
I have been shooting 170 gr. 8mm Silvertips I found loaded with 46.0 IMR4320 for 2370fps oal 2.965.
I do need to adjust the set trigger because all I have to do is touch it and it goes. Fun with a old rifle like this.

--------------------
If your parents don't have children, you won't either

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Questions about Model 1900 M-S tact1 02/03/19 02:22 AM
. * * Re: Questions about Model 1900 M-S lancaster   02/03/19 05:57 AM
. * * Re: Questions about Model 1900 M-S Rothhammer1   03/03/19 11:22 AM
. * * Re: Questions about Model 1900 M-S tact1   19/03/19 01:40 AM
. * * Re: Questions about Model 1900 M-S Rothhammer1   20/03/19 05:26 PM
. * * Re: Questions about Model 1900 M-S tact1   09/04/19 12:10 PM
. * * Re: Questions about Model 1900 M-S Rothhammer1   09/04/19 03:06 PM
. * * Re: Questions about Model 1900 M-S tact1   10/04/19 06:26 AM
. * * Re: Questions about Model 1900 M-S Rothhammer1   10/04/19 01:18 PM
. * * Re: Questions about Model 1900 M-S Rothhammer1   10/04/19 01:52 PM
. * * Re: Questions about Model 1900 M-S tact1   12/04/19 02:48 PM
. * * Re: Questions about Model 1900 M-S Rothhammer1   12/04/19 04:17 PM
. * * Re: Questions about Model 1900 M-S kuduae   13/04/19 03:52 AM
. * * Re: Questions about Model 1900 M-S Rothhammer1   13/04/19 03:43 PM
. * * Re: Questions about Model 1900 M-S tact1   21/04/19 07:19 AM
. * * Re: Questions about Model 1900 M-S 93x64mm   21/04/19 08:01 AM
. * * Re: Questions about Model 1900 M-S Rothhammer1   21/04/19 02:57 PM
. * * Re: Questions about Model 1900 M-S tact1   10/04/19 09:14 AM
. * * Re: Questions about Model 1900 M-S tact1   03/04/19 08:38 AM
. * * Re: Questions about Model 1900 M-S kuduae   03/04/19 10:12 AM
. * * Re: Questions about Model 1900 M-S tact1   03/04/19 12:20 PM
. * * Re: Questions about Model 1900 M-S Rothhammer1   03/04/19 05:38 PM
. * * Re: Questions about Model 1900 M-S Waidmannsheil   19/03/19 08:19 PM

Extra information
0 registered and 15 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 8301

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved