Home | Ezine | Forums | Links | Contact
NitroExpress.com: Haenel 1909

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

kuduae
.400 member


Reged: 13/01/10
Posts: 1792
Loc: middle of Germany
Re: Haenel 1909
      25/03/19 02:14 AM

Quote:

The bolt is Schönauer, the magazine is Mauser 98 and yet the schroud on the bolt is Mauser98 look-a-like inspired.
The caliber is 6,5x57. The scope is Zeiss Zielacht(x8) which is rare too.



These pre-WW1 Haenel rifles, models 1900 and 1909, are not copies of Mannlicher- Schoenauers, but independent parallel developments , both based on The original German M88 "commission" action. The bolt of both the Mannlicher –Schoenauers and the Haenels is not Schoenauer's, but Louis Schlegelmilch's. The magazine with it's intricate leverwork follower was patented by Haenel to avoid patent infringement on Mauser's W-spring design.
Louis Schlegelmilch was the head gunsmith of the Prussian Spandau arsenal. He designed the turn bolt action now usually associated with "Mannlicher". The Steyr factory got an order for several hundred thousand M88 military rifles for the German armies and was allowed to use Schlegelmilch's turning bolt for their own export rifles. As the production capacity of the German government arsenals was insufficient, not only Steyr, but Ludwig Loewe, later DWM, Berlin and the Suhl factories of C.G. Haenel and V.C. Schilling got substantial orders for the new M88 commission rifles and carbines too. After 1895 the Mauser stripper clip loading, flush magazine became popular. The protuding Mannlicher magazine with it's dirt catching opening was not competitive any more for any new military rifle. Steyr could not use Mauser's staggered magazine, then state of the art, for patent reasons. Their director Otto Schoenauer designed his own rotary magazine, stripper clip loading too, and fitted it to the basic Schlegelmilch turnbolt action instead of Mannlicher's magazine. So the famous "Mannlicher – Schoenauer" was born.
After 1898 Haenel, Suhl, faced a similar problem. They too were set up to make the obsolescent M88 action with Schlegelmilch's bolt and the now obsolescent Mannlicher magazine. They still exported M88 action military rifles to many corners of the world and made sporting rifles in several grades, but foresaw the demise of Mannlicher's magazine. So Haenel too tried to upgrade their turnbolt rifles to make them competitive again. Like the Steyr factory they added their own, patented flush, stripper clip loading magazine to the basic Schlegelmilch action, added a gas flange, a new ejector and the two –piece "safety" firing pin.
So both the "Mannlicher – Schoenauers" and the Haenels M1900 and 1909 are in fact parallel developments. None retains any Mannlicher design feature

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Haenel 1909 rigbymauser 24/03/19 08:53 PM
. * * Re: Haenel 1909 lancaster   25/03/19 04:14 AM
. * * Re: Haenel 1909 rigbymauser   24/03/19 08:59 PM
. * * Re: Haenel 1909 NitroXAdministrator   24/03/19 09:40 PM
. * * Re: Haenel 1909 kuduae   25/03/19 02:14 AM
. * * Re: Haenel 1909 Rothhammer1   25/03/19 05:20 PM
. * * Re: Haenel 1909 NitroXAdministrator   26/03/19 01:05 AM
. * * Re: Haenel 1909 JDL   26/03/19 04:14 AM
. * * Re: Haenel 1909 Waidmannsheil   27/03/19 07:00 AM
. * * Re: Haenel 1909 Carpetsahib   28/03/19 11:32 PM
. * * Re: Haenel 1909 lancaster   25/03/19 04:30 AM
. * * Re: Haenel 1909 lancaster   25/03/19 04:34 AM
. * * Re: Haenel 1909 kuduae   25/03/19 02:38 AM

Extra information
0 registered and 46 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 4959

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved