Home | Ezine | Forums | Links | Contact
NitroExpress.com: 37 rimmed in a #4 action

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Lee Speed Forum & Archive

DarylS
.700 member


Reged: 10/08/05
Posts: 26612
Loc: Beautiful British Columbia, Ca...
Re: 37 rimmed in a #4 action
      11/03/19 06:51 AM

Hey Frank - the .375 Rimmed is a worthwile chambering for the #4 or #3, imho.
A slightly more powerful chambering would be the .375 JDJ(IIRC) using the .444 Marlin case.

However, the .375 Rimmed would be fine. When Ken Waters did this chamber on a Ruger #1(or was it a #3Ruger?) he didn't load it very high, pressure wise, as was his usual trait.

Suffice to say, in either of the Enfields, it should do at or over 2,100fps with 270's, about the same power that the 9.5x57 was loaded to, factory wise.

You will have to work on the magazine tabs due to the larger bullet diameter. Converting it to a single stack, with Delrin slabs inside, screwed from the outside, might be an idea. The screws will have to be wood-type screws with beveled heads countersunk into the mag side - V-small dia. would work, I am sure.

I see you are looking at cast bullets. A 300gr. would be super and should get anywhere up to 2,000fps with appropriate loads.

From NOE, the 284gr. and 270gr. looks great.
http://noebulletmolds.com/NV/index.php?cPath=52&osCsid=qj89p0h1of7uqibrtlq9adnvd0

Buffalo Arms also has some nice moulds.
https://www.buffaloarms.com/bullet-moulds/buffalo-arms-bullet-moulds?p=3

On top of those, the RCBS 250gr. is also a good one and shot well for me, in my .375/06IMP & .375 H&H.
http://rcbs.com/Products/Bullet-Casting/Bullet-Moulds/Rifle/Bullet-Mould-37-250-FN-570.aspx


--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 37 rimmed in a #4 action FrankS 10/03/19 06:58 PM
. * * Re: 37 rimmed in a #4 action Ausy   14/03/19 09:45 AM
. * * Re: 37 rimmed in a #4 action DarylS   14/03/19 03:00 PM
. * * Re: 37 rimmed in a #4 action Ausy   14/03/19 06:30 PM
. * * Re: 37 rimmed in a #4 action FrankS   17/03/19 05:49 PM
. * * Re: 37 rimmed in a #4 action Sarg   17/03/19 07:43 PM
. * * Re: 37 rimmed in a #4 action DarylS   18/03/19 05:01 AM
. * * Re: 37 rimmed in a #4 action FrankS   25/03/19 06:11 PM
. * * Re: 37 rimmed in a #4 action DarylS   26/03/19 04:28 AM
. * * Re: 37 rimmed in a #4 action FrankS   31/03/19 05:45 PM
. * * Re: 37 rimmed in a #4 action DarylS   01/04/19 04:23 AM
. * * Re: 37 rimmed in a #4 action FrankS   07/04/19 08:04 PM
. * * Re: 37 rimmed in a #4 action DarylS   08/04/19 02:36 AM
. * * Re: 37 rimmed in a #4 action FrankS   14/04/19 04:56 PM
. * * Re: 37 rimmed in a #4 action DarylS   11/03/19 06:51 AM

Extra information
0 registered and 15 anonymous users are browsing this forum.

Moderator:  NitroX 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5365

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved