Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Questions about Model 1900 M-S

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

tact1
.224 member

Reged: 24/07/17
Posts: 29
Loc: Bahama, North Carolina USA

Questions about Model 1900 M-S
02/03/19 02:22 AM

I have a Model 1900 which is typical of all the M-S Steyr of that era, double-set triggers, claw scope mounts, butter knife bolt handle. From information found here and other locations I read that the model 1900 was in 6.5x54M-S. This one was purchased as an 8x56 M-S and appears to be. Having a bit of an issue with ammo though. Bullet diameter listed for these suggests .323 as correct and that is what I was trying. First attempts had several that would not fire. I suspected the shoulder was not supporting the case so I made a new batch of cases by necking up 8x57 Mauser cases to .358 and then using a full length sizer for 8x56 to form a new shoulder. I backed the die off a couple of turns and started sizing and trying the case in the chamber until I got a good fit with the bolt just closing. I shot several of these and although my elevation was off with the fixed and folding rear sight I was generally pleased. I wanted to make a few more cases last night and decided I would use a .338 expander instead of .358. When I went to form the shoulder all of the cases would chamber, no matter how much I backed the die out. So I thought my chamber is a little large. Then for some reason I picked up a .308 bullet on my bench and stuck it nose first into the end of the barrel. I surprised me when it stopped and would not enter completely. I then tried it in 2 8x57 Mauser rifles and the same bullet dropped all the way through the barrel. All this makes me have questions. Does my rifle have a bore made for the .318 diameter bullet? If so, why is my chamber so big? I will try to case a suitable slug to push down the barrel to try and get a correct bore diameter.

--------------------
If your parents don't have children, you won't either

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Questions about Model 1900 M-S	tact1	02/03/19 02:22 AM
Re: Questions about Model 1900 M-S	lancaster	02/03/19 05:57 AM
Re: Questions about Model 1900 M-S	Rothhammer1	03/03/19 11:22 AM
Re: Questions about Model 1900 M-S	tact1	19/03/19 01:40 AM
Re: Questions about Model 1900 M-S	Rothhammer1	20/03/19 05:26 PM
Re: Questions about Model 1900 M-S	tact1	09/04/19 12:10 PM
Re: Questions about Model 1900 M-S	Rothhammer1	09/04/19 03:06 PM
Re: Questions about Model 1900 M-S	tact1	10/04/19 06:26 AM
Re: Questions about Model 1900 M-S	Rothhammer1	10/04/19 01:18 PM
Re: Questions about Model 1900 M-S	Rothhammer1	10/04/19 01:52 PM
Re: Questions about Model 1900 M-S	tact1	12/04/19 02:48 PM
Re: Questions about Model 1900 M-S	Rothhammer1	12/04/19 04:17 PM
Re: Questions about Model 1900 M-S	kuduae	13/04/19 03:52 AM
Re: Questions about Model 1900 M-S	Rothhammer1	13/04/19 03:43 PM
Re: Questions about Model 1900 M-S	tact1	21/04/19 07:19 AM
Re: Questions about Model 1900 M-S	93x64mm	21/04/19 08:01 AM
Re: Questions about Model 1900 M-S	Rothhammer1	21/04/19 02:57 PM
Re: Questions about Model 1900 M-S	tact1	10/04/19 09:14 AM
Re: Questions about Model 1900 M-S	tact1	03/04/19 08:38 AM
Re: Questions about Model 1900 M-S	kuduae	03/04/19 10:12 AM
Re: Questions about Model 1900 M-S	tact1	03/04/19 12:20 PM
Re: Questions about Model 1900 M-S	Rothhammer1	03/04/19 05:38 PM
Re: Questions about Model 1900 M-S	Waidmannsheil	19/03/19 08:19 PM

Extra information

0 registered and 407 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 6792

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved