Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Cast bullet loads for the 6.5X54

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

DarylS
.700 member

Reged: 10/08/05
Posts: 27005
Loc: Beautiful British Columbia, Ca...

Re: Cast bullet loads for the 6.5X54
21/02/19 09:59 AM

I would much rather work with the medium burn rate powders, like H4895 or IMR4895 or maybe even 4198's on the faster rifle powder side. Yes - in the 6.5x54, they are slower when talking about cast bullets, but these are commonly known as medium burning powders.

Getting a slightly slower start of the bullet, rather than the fast punch of a low density load of the pistol powders, I think it a good idea. A slower building of pressure using these medium powders (4895's, 3031, 4198), and not having to use a filler is also a good thing.

Herculese powder 2400 and IMR or H4227 are VERY fast burning rifle powders (.22 Hornet and similar cases) but also very slow burning pistol powders, at the same time & are more commonly thought of as pistol powders - unless you shoot a Hornet, that is.

2400 was developed as THE Hornet powder as it was used to develop 2,400fps - back in the 1920/1930's in the .22Hornet.

They are both good at developing top-end loads in magnum handgun ctgs. like the .44 mag and .357 mag.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Cast bullet loads for the 6.5X54	Hook	20/02/19 12:07 PM
Re: Cast bullet loads for the 6.5X54	DarylS	20/02/19 01:11 PM
Re: Cast bullet loads for the 6.5X54	Huvius	20/02/19 02:41 PM
Re: Cast bullet loads for the 6.5X54	DarylS	20/02/19 03:21 PM
Re: Cast bullet loads for the 6.5X54	Hook	20/02/19 04:22 PM
Re: Cast bullet loads for the 6.5X54	Sarg	20/02/19 05:22 PM
Re: Cast bullet loads for the 6.5X54	Hook	21/02/19 12:48 AM
Re: Cast bullet loads for the 6.5X54	DarylS	21/02/19 04:30 AM
Re: Cast bullet loads for the 6.5X54	Sarg	21/02/19 07:23 AM
Re: Cast bullet loads for the 6.5X54	Hook	21/02/19 08:24 AM
Re: Cast bullet loads for the 6.5X54	DarylS	21/02/19 09:59 AM
Re: Cast bullet loads for the 6.5X54	451whitworth	04/06/19 01:44 AM
Re: Cast bullet loads for the 6.5X54	DarylS	04/06/19 12:34 PM
Re: Cast bullet loads for the 6.5X54	Sarg	20/02/19 12:40 PM

Extra information

0 registered and 82 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3821

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved