Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Reloading information for the 9.5x56 MS

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

Rothhammer1
.400 member

Reged: 06/01/17
Posts: 1826
Loc: The Redwoods of California

Re: Reloading information for the 9.5x56 MS
31/01/19 04:47 PM

An old thread with load development from member Marrakai of the excellent forum, NitroExpress.com : 'Crackers' for 9.5X57

Another regarding brass: 9.5X57 brass

Notice member Daryl's advice regarding the lower and narrower shoulders of some _X57 brass that will require that the necks be drawn straight to allow for a slight 'crush fit' of the shoulder:

Re: ? For 9.5x57 owners [Re: NSW_HUNTER]
#179532 - 04/21/11 05:31 AM

I suggest you first neck the brass up straight,then use a Full Length sizing die adjusted long at first, successively lower to neck the cases back down to proper length to get what is called a 'crush' fit - ie; tight fit when closing the bolt. This will ensure the brass fits perfectly before a shot is fired. The reason for doing this is to ensure your brass lasts almost indefinitely.

The reason for I do this, is so the brass never stretches at the web, as it will if there is even a bit of headspace slop.

Note the properly sized and 'fitted case' has a shoulder height that is .019" higher than a simply necked up case. To fire a simply necked up case in this rifle, would have stretched the case badly at the web, and it would have failed/split into 2 pieces in 2 to 4 firings. The .019" headspace of this rifle is excessive, but totally safe with properly fitted ammo.

Also advice from member Kuduae:

I form my 9.5x57M-Sch aka .375 rimless NE cases from W-W or S&B 30-06 brass, trimmed to 57mm of course. Merely necking up 8x57 or 9.3x57 brass led to problems from excessive headspace. For more on my rifle and load see:

Kuduae post

--------------------
Citizen of the Cherokee Nation

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Reloading information for the 9.5x56 MS	85lc	11/01/19 02:29 PM
Re: Reloading information for the 9.5x56 MS	Rothhammer1	15/01/19 10:39 AM
Re: Reloading information for the 9.5x56 MS	85lc	29/01/19 02:28 AM
Re: Reloading information for the 9.5x56 MS	Rothhammer1	30/01/19 05:39 PM
Re: Reloading information for the 9.5x56 MS	Rothhammer1	31/01/19 02:09 PM
Re: Reloading information for the 9.5x56 MS	Rothhammer1	31/01/19 04:47 PM
Re: Reloading information for the 9.5x56 MS	Hotzenplotz	07/01/20 12:07 AM
Re: Reloading information for the 9.5x56 MS	Marrakai	24/01/20 11:47 AM
Re: Reloading information for the 9.5x56 MS	Ash	29/07/20 08:19 PM
Re: Reloading information for the 9.5x56 MS	Rothhammer1	11/01/19 10:16 PM
Re: Reloading information for the 9.5x56 MS	Rothhammer1	11/01/19 10:03 PM
Re: Reloading information for the 9.5x56 MS	xausa	11/01/19 10:26 PM
Re: Reloading information for the 9.5x56 MS	DarylS	12/01/19 05:43 AM
Re: Reloading information for the 9.5x56 MS	9.3x57	12/01/19 01:32 PM
Re: Reloading information for the 9.5x56 MS	Rothhammer1	12/01/19 11:02 PM
Re: Reloading information for the 9.5x56 MS	DarylS	13/01/19 05:32 AM
Re: Reloading information for the 9.5x56 MS	Rothhammer1	13/01/19 02:19 PM

Extra information

2 registered and 12 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 10118

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved