Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Bolt Insertion Issues

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Lee Speed Forum & Archive

HeymSR20
.300 member

Reged: 23/11/11
Posts: 246
Loc: Scotland

Re: Bolt Insertion Issues
03/01/19 09:56 PM

From memory, when I trained on the No 4 Rifle as a Cadet the bolt head screws into the main body of the bolt. If it is not fully screwed in the rifle will not close properly.

Also check the serial numbers - is it the correct bolt for the rifle? If its not, and if it is not closing you may be able to get a good gunsmith to be able to fit it by judicious bit hard fitting. Remember that with the Lee action the locking lugs are at the rear of the bolt, not at the head like a Mauser / Remington. And they cock on closing - it's the sear that holds back the firing pin as the bolt is pushed forward. There is no camming effect on opening on the firing pin aka Mauser 98 or Rem 700.

Post Extras

Entire topic
Subject	Posted by	Posted on
Bolt Insertion Issues	Charles_Helm	16/12/18 12:48 PM
Re: Bolt Insertion Issues	Sarg	16/12/18 07:47 PM
Re: Bolt Insertion Issues	Charles_Helm	16/12/18 10:51 PM
Re: Bolt Insertion Issues	9.3x57	17/12/18 01:34 AM
Re: Bolt Insertion Issues	eagle27	17/12/18 04:07 PM
Re: Bolt Insertion Issues	9.3x57	17/12/18 04:26 PM
Re: Bolt Insertion Issues	Sarg	17/12/18 06:05 PM
Re: Bolt Insertion Issues	englishman_ca	26/12/18 09:50 AM
Re: Bolt Insertion Issues	HeymSR20	03/01/19 09:56 PM
Re: Bolt Insertion Issues	Charles_Helm	08/02/19 03:13 PM

Extra information

0 registered and 20 anonymous users are browsing this forum.

Moderator: NitroX

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 4773

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact