Quote:

---

Joel, there are two small screws next to the levers, do these adjust a gibb strip to eliminate sideways movement of the rings or do they contact the dovetail directly.

---

These screws are there only to prevent the levers from tilting too far when tipped to unlock the removable part of the assembly.
On these G&H original versions, entirely in steel, and especially when you take the trouble to specifically machine the base, the side play is just minimum to allow the fitting of the rail supporting the scope.
Note also that on that side mount model disassembly is done forward which allows using a scope with a larger diameter front lens.

DORLEAC
www.dorleac-dorleac.com

Post Extras