Home | Ezine | Forums | Links | Contact
NitroExpress.com: Winchester Model 71

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Ripp
.577 member


Reged: 19/02/07
Posts: 16072
Loc: Montana, USA
Re: Winchester Model 71
      12/12/18 03:20 PM

Quote:

Quote:

The case easily achieved 2,200fps with 500gr. Hornady RN's from the 24" bl.

I didn't like the recoil for my use, so set the barrel back almost 2" and re-chambered it for the .458 2", which reamer I also have.

The load I liked, uses 51.5gr. H4198 for 2,150fps with the 400gr. Barnes SP. My .458 Alaskan required 60.0gr. Re#7 to get the same speed and of course, kicked more - thus, the re-chamber
- however, the .450 Alaskan in a strong action is nothing to sneeze at.

Even in the Model 71 Winchester that H. Johnson used, the first rifle thus barreled and chambered, it was doing over 2,000fps with 400gr. bullets & deadly on brown bears as a backup rifle.




I had both the Winchester and Browning versions. Killed deer and bear with them. The Jap-made Browning was far better made than the Winchester. The Jap was very accurate. The Winchester produced what are common to that rifle's grouping, about 4+ inches for 5 shots at 100 yards. My Winchester had the old Lyman 38 sight on it.

I really like the 71/86 action.

Years ago I interviewed Harold Johnson for a Wolfe Publishing article. Great old guy.




Found this online

Harold’s favorite load in the .50 Alaskan was 51.5 grains (3.34 g) of IMR-4198 with a Barnes 400-grain (26 g) flatnose, jacketed bullet for about 2,100 ft/s (640 m/s) and just under 4,000 ft⋅lbf (5,400 J)of muzzle energy.[citation needed].
The Alaskan is shorter than the .510 Kodiak Express and produces about 10% less energy or 33% less energy than the 50-110, out of a 71 Winchester re-barreled to chamber the 50-110 WCF 6,000 foot-pounds.

--------------------
ALL MEN DIE, BUT FEW MEN TRULY LIVE..

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Winchester Model 71 Ripp 12/12/18 03:15 AM
. * * Re: Winchester Model 71 Rule303   14/12/18 09:38 AM
. * * Re: Winchester Model 71 Homer   23/12/18 06:00 PM
. * * Re: Winchester Model 71 DarylS   24/12/18 06:06 AM
. * * Re: Winchester Model 71 Homer   24/12/18 10:15 AM
. * * Re: Winchester Model 71 DarylS   24/12/18 01:47 PM
. * * Re: Winchester Model 71 Homer   24/12/18 03:10 PM
. * * Re: Winchester Model 71 szihn   12/12/18 03:23 AM
. * * Re: Winchester Model 71 DarylS   12/12/18 04:33 AM
. * * Re: Winchester Model 71 93x64mm   12/12/18 07:04 AM
. * * Re: Winchester Model 71 450_Ackley   12/12/18 09:06 PM
. * * Re: Winchester Model 71 9.3x57   13/12/18 01:24 AM
. * * Re: Winchester Model 71 9.3x57   13/12/18 03:01 AM
. * * Re: Winchester Model 71 Ripp   13/12/18 03:33 AM
. * * Re: Winchester Model 71 9.3x57   13/12/18 04:42 AM
. * * Re: Winchester Model 71 Ripp   13/12/18 08:13 AM
. * * Re: Winchester Model 71 DarylS   13/12/18 06:47 AM
. * * Re: Winchester Model 71 93x64mm   13/12/18 07:25 AM
. * * Re: Winchester Model 71 Ripp   13/12/18 08:09 AM
. * * Re: Winchester Model 71 93x64mm   14/12/18 07:20 AM
. * * Re: Winchester Model 71 9.3x57   13/12/18 04:03 PM
. * * Re: Winchester Model 71 DarylS   14/12/18 12:34 AM
. * * Re: Winchester Model 71 9.3x57   14/12/18 03:36 AM
. * * Re: Winchester Model 71 DarylS   12/12/18 11:27 AM
. * * Re: Winchester Model 71 9.3x57   12/12/18 02:01 PM
. * * Re: Winchester Model 71 Ripp   12/12/18 03:20 PM
. * * Re: Winchester Model 71 9.3x57   12/12/18 04:19 PM
. * * Re: Winchester Model 71 9.3x57   12/12/18 04:28 PM
. * * Re: Winchester Model 71 Ripp   12/12/18 10:17 PM
. * * Re: Winchester Model 71 szihn   12/12/18 02:11 PM

Extra information
0 registered and 519 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 7063

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved