Home | Ezine | Forums | Links | Contact
NitroExpress.com: Interesting Brenneke Mauser in 6.7x64?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Rothhammer1
.400 member


Reged: 06/01/17
Posts: 1826
Loc: The Redwoods of California
Re: Interesting Brenneke Mauser in 6.7x64?
      10/09/18 03:28 PM

Quote:


Most European cartridges got their name not from the bullet or groove diameter, but from the smaller bore/land diameter. So the popular "6.5 mm cartridges use .264 = 6.7 mm bullets.. Some countries or companies named such cartridges for their bullet diameters and did not count the thickness of the rim into the case length. I have seen some 1920s Czech 6.5x54 M-Sch cartridges labeled 6.7X53.




Indeed. From the 1939 Stoeger:


The '6.5X53', '6.7x53', and '6.7mm' are far more commonly referred to these days as 6.5X54 Mannlicher Schönauer.
Notice also the 8.2mm for (M1908) 8X56.

As known to MS afficianados, 9.5X57 has several names including 9.5X56, 9.5X56.7, and its 'British' designation of .375 Nitro Express Rimless 2.25" - though the 'RNE' often shows a different (lower) powder charge on ballistics charts when shown alongside 9.5X57.



Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Interesting Brenneke Mauser in 6.7x64? Gundog01 08/09/18 09:55 PM
. * * Re: Interesting Brenneke Mauser in 6.7x64? Homer   29/03/19 04:50 PM
. * * Re: Interesting Brenneke Mauser in 6.7x64? DarylS   08/09/18 11:03 PM
. * * Re: Interesting Brenneke Mauser in 6.7x64? Rothhammer1   09/09/18 03:25 PM
. * * Re: Interesting Brenneke Mauser in 6.7x64? Igorrock   09/09/18 05:40 PM
. * * Re: Interesting Brenneke Mauser in 6.7x64? xausa   09/09/18 08:18 PM
. * * Re: Interesting Brenneke Mauser in 6.7x64? Gundog01   09/09/18 09:28 PM
. * * Re: Interesting Brenneke Mauser in 6.7x64? kuduae   09/09/18 11:11 PM
. * * Re: Interesting Brenneke Mauser in 6.7x64? Rothhammer1   10/09/18 03:28 PM
. * * Re: Interesting Brenneke Mauser in 6.7x64? Shikari   26/03/19 05:22 AM

Extra information
0 registered and 27 anonymous users are browsing this forum.

Moderator:  NitroX 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5316

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved