Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Making a DR from scratch - What's involved???

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

Marrakai
.416 member

Reged: 09/01/03
Posts: 3591
Loc: Darwin, Top End of Australia

Re: Making a DR from scratch - What's involved???
25/05/05 12:34 PM

Dok:
To my knowledge, the only gunsmith in Australia who has made SxS double-rifles from shotguns on anything like a regular basis is Rolph Bachnick, I think his Melbourne shingle says 'Safari Arms'. Dunno whether he will still do this though. I have one of his efforts, a .577 Light Nitro double on a Greener Empire action. I have posted the story of that gun before: newbies can read it here.

Ron Webb made a couple of U/Os on the Ruger Red Label action years ago, chambered in .375 Flanged Magnum. I'm told they were good, but I believe Ron is long retired.

Ellis Brown favours German shotguns with a cross-bolt third fastener, however my advice fwiw would be to forget the .416 Rigby and the .470 Nitro, they are fat cartridges and wouldn't leave much meat around the chamber. Back-thrust on the standing breech can be quite high with full-nitro loads in fat cartridges. Slimmer cartridges or lower pressure options should be selected IMO, despite Ellis Brown's enthusiasm!

Remember, you are dealing with shotgun actions proved for service pressures in the 3 to 5 ton range, and proposing to fit them up for 14 to 18-ton loads!!!

While the pressure calculations are much more complicated than that, of course, I hope it still offers some sobriety to your proposal!

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Making a DR from scratch - What's involved???	dok	24/05/05 08:28 PM
Re: Making a DR from scratch - What's involved???	DUGABOY1	26/05/05 03:57 AM
Re: Making a DR from scratch - What's involved???	400NitroExpress	26/05/05 07:20 AM
Re: Making a DR from scratch - What's involved???	Metswedi	26/05/05 06:17 AM
Re: Making a DR from scratch - What's involved???	davem3	25/05/05 01:28 PM
Re: Making a DR from scratch - What's involved???	dok	25/05/05 07:25 PM
Re: Making a DR from scratch - What's involved???	doublegunfan	25/05/05 01:46 AM
Re: Making a DR from scratch - What's involved???	Marrakai	25/05/05 12:34 PM
Re: Making a DR from scratch - What's involved???	500grains	24/05/05 11:47 PM

Extra information

0 registered and 157 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 1575

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved