Home | Ezine | Forums | Links | Contact
NitroExpress.com: Factory threaded barrel?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

lancaster
.470 member


Reged: 06/05/08
Posts: 9036
Loc: There's a lighthouse in the mi...
Re: Factory threaded barrel?
      25/08/18 04:17 AM

safe the pics





"serial #6333, 6.5x54 MS, 22 1/2”, likely factory threaded, barrel with a bright excellent bore. The metal surfaces retain about 90-92% original blue, the loss is due to even fading with high edge and contact point wear, the barrel with a number of small flaked spots of loss. The muzzle of the barrel is neatly threaded for a sound moderator, the factory banded sporting front sight ramp was sweated in place appropriately rearward to allow for the threading, as well the nosecap appears to have been purposefully fitted to accommodate the ramp and O.D. of the barrel ahead of it, the blue clearly being original to the gun, this was done when the rifle was new. The races of the action remain bright and there is good straw temper on the cartridge release and on the bolt handle catch with some nice pale fire temper blue remaining on the bolt stop. There is a bit of light surface oxidation on the floorplate and on the bow of the guard, the triggerplate showing some nice color case-hardening. The classic style European walnut stock rates very good with nearly all its original varnish and overall minor dings and handling marks from the years. It features the typical rounded left-side cheekpiece and a bone pistolgrip cap which shows some light insect damage. The steel butt trap buttplate has been replaced by a 1” recoil pad, the stock does not appear to have been cut, only flattened to accommodate the pad, the current length of pull being 14 3/4” to the front trigger. The original open sights are intact, the rear being two leaf and the arm seems to function well mechanically. There is a very nice knurled thread protector cap included with the arm, thread dimensions appear to be .495” by about 20 tpi (1/2x20), although the 1.3mm tpi thread gauge fits more closely (12x1.3). In any event, a lovely rifle still in a very fine state of condition with the added bonus of being threaded for a sound moderator. (38873-593) {C&R}
"

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Factory threaded barrel? casper50 23/08/18 05:45 AM
. * * Re: Factory threaded barrel? kuduae   25/08/18 10:49 PM
. * * Re: Factory threaded barrel? Rothhammer1   26/08/18 02:58 PM
. * * Re: Factory threaded barrel? tinker   26/08/18 12:05 AM
. * * Re: Factory threaded barrel? lancaster   25/08/18 04:17 AM
. * * Re: Factory threaded barrel? Rothhammer1   23/08/18 05:55 AM
. * * Re: Factory threaded barrel? Louis   24/08/18 03:01 PM
. * * Re: Factory threaded barrel? DonZ   25/08/18 01:36 AM
. * * Re: Factory threaded barrel? Rothhammer1   25/08/18 08:31 PM
. * * Re: Factory threaded barrel? Rothhammer1   24/08/18 06:40 PM

Extra information
0 registered and 33 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3305

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved