Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Take down pin

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

Rothhammer1
.400 member

Reged: 06/01/17
Posts: 1829
Loc: The Redwoods of California

Re: Take down pin
26/06/18 10:01 PM

Dimensions of Mannlicher Schoenauer (Schönauer) Take Down Pin:
(From pin of 1922 proofed M1910)

Inch --- Millimeter --- # - Description
____________________________________________________________________

1.312 --- 33.32 --- 01) Overall Length

0.073 --- 01.86 --- 02) Thickness of head*

0.079 --- 02.00 --- 03) Head to Flange

0.032 --- 00.82 --- 04) Flange Thickness

0.187 --- 04.75 --- 05) Top of Head to Bottom of Flange

1.063 --- 27.00 --- 06) Flange to Radius at Bottom of Pin

0.445 --- 11.30 --- 07) Diameter of Head

0.251 --- 06.38 --- 08) Diameter of Flange

0.185 --- 04.70 --- 09) Diameter at Inside of Radius Between Head and Flange

Diameter of Pin:
0.197 --- 05.00 --- 10) At Flange

0.179 --- 04.54 --- 11) At 13.5mm Below Flange (mid-point to bottom radius)

0.165 --- 04.20 --- 12) At Start of Radius at Bottom of Pin

0.850 --- 21.60 --- 13) Center of Spring Pin to Flange

0.874 --- 22.20 --- 14) Bottom of Cut for Spring (to flange)

0.064 --- 01.62 --- 15) Thickness of Spring

0.065 --- 01.64 --- 16) Width of Slot for Spring

0.106 --- 02.70 --- 17) Notch in Spring (Catch)

0.221 --- 05.62 --- 18) Width of 'Push Pin' Face (Knurled)

0.092 --- 02.34 --- 19) Thickness of #18 at center (ends taper upward in a 'moon' shape)

*02) Underside of Head of Pin tapers downward toward center - thickness measured at edge where knurl begins. This is why #s 2+3+4 = less than #5

The plates mounted to the stock have holes of the following size for the pin to pass through (from right to left); Right Side - 5mm Left Side - 4.4mm .

Photographed from underside (right is left).
The distance between the outside faces of the escutcheon plates (at the pin holes) on this 1922 proofed M1910 Takedown is one inch (25.4 mm).

Ol' Grand Dad with the M1910 Takedown.

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Take down pin	xausa	23/06/18 07:22 PM
Re: Take down pin	casper50	23/06/18 09:39 PM
Re: Take down pin	Louis	23/06/18 10:01 PM
Re: Take down pin	xausa	23/06/18 11:07 PM
Re: Take down pin	Rothhammer1	24/06/18 11:05 AM
Re: Take down pin	casper50	24/06/18 04:12 PM
Re: Take down pin	deeangeo	02/07/18 05:08 PM
Re: Take down pin	Rothhammer1	02/07/18 08:32 PM
Re: Take down pin	deeangeo	03/07/18 04:51 PM
Re: Take down pin	xausa	24/06/18 11:47 PM
Re: Take down pin	xausa	25/06/18 12:09 AM
Re: Take down pin	Rothhammer1	25/06/18 10:24 AM
Re: Take down pin	tinker	25/06/18 10:50 AM
Re: Take down pin	casper50	26/06/18 02:59 AM
Re: Take down pin	Rothhammer1	26/06/18 10:01 PM
Re: Take down pin	FrankFarmer	04/07/18 06:52 AM
Re: Take down pin	Rothhammer1	04/07/18 03:06 PM
Re: Take down pin	FrankFarmer	05/07/18 01:10 PM
Re: Take down pin	tinker	25/06/18 01:51 AM
Re: Take down pin	xausa	25/06/18 02:13 AM
Re: Take down pin	Rothhammer1	25/06/18 10:04 AM
Re: Take down pin	casper50	25/06/18 02:36 AM
Re: Take down pin	tinker	25/06/18 02:41 AM
Re: Take down pin	casper50	25/06/18 06:20 AM
Re: Take down pin	Rothhammer1	25/06/18 06:38 AM
Re: Take down pin	tinker	25/06/18 06:54 AM
Re: Take down pin	Rothhammer1	25/06/18 07:27 AM
Re: Take down pin	tinker	25/06/18 08:39 AM
Re: Take down pin	casper50	25/06/18 07:15 AM
Re: Take down pin	Rothhammer1	25/06/18 06:19 AM
Re: Take down pin	tinker	25/06/18 02:34 AM
Re: Take down pin	Louis	25/06/18 02:10 AM

Extra information

1 registered and 19 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 8545

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved