Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Westley Richards Model 1881 Needs Help

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

85lc
.400 member

Reged: 19/01/18
Posts: 1038
Loc: Georgia, USA

Re: Westley Richards Model 1881 Needs Help
04/04/18 08:44 AM

Guys,

I have an issue with my WR 1881 locking up, making it a true single shot. A friend of mine also has a WR1881 that also locks up.

The caliber of my gun is 500/450 #1. The brass is 50/90 that was shortened and formed. There is approximately 0.004" of head space which I think may be needed to keep the block from binding when being raised /lowered.

I was hoping someone had a similar experience with a WR1881 and could offer advise.

It appears to be two problems. I will discussed these below.

With the gun locked up, I remove the lower tang. The firing pin is forward. A tap or two with a brass rod will release the firing pin.

If the case is just a primed but unloaded case, the primer backs out 0.001". There is a slight rub mark on the bottom of the primer, as if the firing pin is dragging.

The firing pin seems to be good, it exerts good pressure on the pin (I notice the pressure when pushing the pin in with my finger)

When I first tried shooting this gun, I disassembled it and noticed the firing pin was too long and the tip was flat, in fact, somewhat sharp on the upper edge. The pin is the correct diameter for the block.

I think the pin must have been a replacement pin.

I rounded the tip and shorten the pin so there was 0.057" protrusion when fired. The pin was soft, somewhat rough and slightly bent. I cleaned up the outside and oil hardened the tip to keep it from bending (the pin is at 35 degree to bore).

Well, the gun continues to lock up so I would like to get your advise.

--------------------
RB

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Westley Richards Model 1881 Needs Help	gt8977c	28/07/17 02:49 AM
Re: Westley Richards Model 1881 Needs Help	Wayne59	28/07/17 05:19 AM
Re: Westley Richards Model 1881 Needs Help	Huvius	16/08/17 11:51 AM
Re: Westley Richards Model 1881 Needs Help	Wayne59	16/08/17 08:49 PM
Re: Westley Richards Model 1881 Needs Help	85lc	21/01/18 07:59 AM
Re: Westley Richards Model 1881 Needs Help	Huvius	21/01/18 11:26 AM
Re: Westley Richards Model 1881 Needs Help	85lc	25/01/18 06:01 AM
Re: Westley Richards Model 1881 Needs Help	Huvius	25/01/18 09:32 AM
Re: Westley Richards Model 1881 Needs Help	DarylS	25/01/18 10:18 AM
Re: Westley Richards Model 1881 Needs Help	85lc	26/01/18 10:33 AM
Re: Westley Richards Model 1881 Needs Help	Huvius	26/01/18 02:36 PM
Re: Westley Richards Model 1881 Needs Help	TH44	22/01/18 10:10 AM
Re: Westley Richards Model 1881 Needs Help	85lc	09/02/18 04:14 AM
Re: Westley Richards Model 1881 Needs Help	3DogMike	09/02/18 05:03 AM
Re: Westley Richards Model 1881 Needs Help	DarylS	09/02/18 05:22 AM
Re: Westley Richards Model 1881 Needs Help	Huvius	09/02/18 07:42 AM
Re: Westley Richards Model 1881 Needs Help	DarylS	09/02/18 10:32 AM
Re: Westley Richards Model 1881 Needs Help	85lc	04/04/18 08:44 AM
Re: Westley Richards Model 1881 Needs Help	casper50	04/04/18 01:04 PM
Re: Westley Richards Model 1881 Needs Help	Huvius	04/04/18 01:55 PM
Re: Westley Richards Model 1881 Needs Help	tinker	05/04/18 02:51 AM
Re: Westley Richards Model 1881 Needs Help	DarylS	05/04/18 04:02 AM
Re: Westley Richards Model 1881 Needs Help	MikeRowe	05/04/18 12:30 PM
Re: Westley Richards Model 1881 Needs Help	DarylS	05/04/18 01:36 PM
Re: Westley Richards Model 1881 Needs Help	MikeRowe	05/04/18 09:00 PM
Re: Westley Richards Model 1881 Needs Help	85lc	07/04/18 12:46 AM
Re: Westley Richards Model 1881 Needs Help	Huvius	07/04/18 11:03 PM
Re: Westley Richards Model 1881 Needs Help	85lc	30/04/18 10:35 AM
Re: Westley Richards Model 1881 Needs Help	DarylS	30/04/18 11:00 AM
Re: Westley Richards Model 1881 Needs Help	93x64mm	01/05/18 07:39 AM
Re: Westley Richards Model 1881 Needs Help	Huvius	01/05/18 01:49 PM
Re: Westley Richards Model 1881 Needs Help	TH44	09/02/18 10:20 AM
Re: Westley Richards Model 1881 Needs Help	Wayne59	22/01/18 11:36 AM
Re: Westley Richards Model 1881 Needs Help	85lc	25/01/18 06:09 AM
Re: Westley Richards Model 1881 Needs Help	Huvius	28/07/17 06:25 AM
Re: Westley Richards Model 1881 Needs Help	50Calshtr	29/07/17 12:50 AM
Re: Westley Richards Model 1881 Needs Help	Huvius	29/07/17 04:21 AM
Re: Westley Richards Model 1881 Needs Help	3DogMike	29/07/17 08:44 AM
Re: Westley Richards Model 1881 Needs Help	gt8977c	31/07/17 09:50 AM
Re: Westley Richards Model 1881 Needs Help	MikeRowe	31/07/17 10:33 AM
Re: Westley Richards Model 1881 Needs Help	gt8977c	05/08/17 03:37 AM
Re: Westley Richards Model 1881 Needs Help	3DogMike	05/08/17 04:38 AM
Re: Westley Richards Model 1881 Needs Help	gt8977c	05/08/17 05:18 AM
Re: Westley Richards Model 1881 Needs Help	bpesteve	09/08/18 03:20 PM
Re: Westley Richards Model 1881 Needs Help	3DogMike	05/08/17 05:35 AM
Re: Westley Richards Model 1881 Needs Help	MikeRowe	05/08/17 08:55 AM
Re: Westley Richards Model 1881 Needs Help	DarylS	05/08/17 08:40 AM
Re: Westley Richards Model 1881 Needs Help	Huvius	05/08/17 05:06 AM
Re: Westley Richards Model 1881 Needs Help	50Calshtr	04/08/17 05:51 AM
Re: Westley Richards Model 1881 Needs Help	Wayne59	04/08/17 08:29 AM
Re: Westley Richards Model 1881 Needs Help	dracb	04/08/17 05:57 PM
Re: Westley Richards Model 1881 Needs Help	3DogMike	04/08/17 08:28 AM
Re: Westley Richards Model 1881 Needs Help	Huvius	29/07/17 09:29 AM

Extra information

0 registered and 60 anonymous users are browsing this forum.

Moderator: Huvius

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 29017

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved