Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Aussie Copper for M1910

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

Rothhammer1
.400 member

Reged: 06/01/17
Posts: 1830
Loc: The Redwoods of California

Re: Aussie Copper for M1910
28/12/17 05:02 PM

Kuduae: " short, pointed bullets that are too short to be engaged by the guide flange, the front ends of the cartridges in the magazine will drop away from the carrier spindle and jam. This is your "third round problem"! "

Reply: That is what I had noticed (regarding the M1910). Loading the magazine out of the rifle revealed where the bullets were falling into the void and jamming in the rotor housing.

Kuduae: "Loaded cartridges for the M1910 should at least have a Diameter of about 7.5 =.30" at 70 mm = 2.75" from the base for proper function in the magazine. Other bullets with very slim, pointed noses will be hopeless, as they may be too slim 8 mm behind the point to be held properly to the spindle."

Reply: This is precisely the sort of specific information that has great value here. I had already marked an original DWM 531 projectile at various points to compare measurements to available projectiles, then found the Eley drawing.

My first contact with Aussie Copper was to inquire as to their bullet's dimensions. Never did get their reply on that... would have saved me the return shipping.

Again, Herr Eichendorff, thank you for sharing valued experience.

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Aussie Copper for M1910	Rothhammer1	03/10/17 07:50 PM
Re: Aussie Copper for M1910	Rule303	03/10/17 09:26 PM
Re: Aussie Copper for M1910	Rothhammer1	04/10/17 05:54 PM
Re: Aussie Copper for M1910	Rule303	04/10/17 09:38 PM
Re: Aussie Copper for M1910	Rothhammer1	22/12/17 09:28 PM
Re: Aussie Copper for M1910	Waidmannsheil	04/10/17 09:04 PM
Re: Aussie Copper for M1910	Rothhammer1	22/12/17 09:32 PM
Re: Aussie Copper for M1910	Rule303	23/12/17 04:34 PM
Re: Aussie Copper for M1910	kuduae	23/12/17 01:08 AM
Re: Aussie Copper for M1910	Rothhammer1	23/12/17 07:20 PM
Re: Aussie Copper for M1910	DarylS	24/12/17 03:20 AM
Re: Aussie Copper for M1910	Rothhammer1	24/12/17 02:15 PM
Re: Aussie Copper for M1910	kuduae	24/12/17 06:11 AM
Re: Aussie Copper for M1910	Rothhammer1	24/12/17 02:50 PM
Re: Aussie Copper for M1910	kuduae	24/12/17 09:08 PM
Re: Aussie Copper for M1910	Rothhammer1	25/12/17 03:27 PM
Re: Aussie Copper for M1910	DarylS	24/12/17 04:10 PM
Re: Aussie Copper for M1910	paradox_	24/12/17 04:43 PM
Re: Aussie Copper for M1910	Rothhammer1	24/12/17 05:01 PM
Re: Aussie Copper for M1910	Rothhammer1	24/12/17 05:12 PM
Re: Aussie Copper for M1910	Viking338	25/12/17 03:00 AM
Re: Aussie Copper for M1910	Rothhammer1	28/12/17 06:06 PM
Re: Aussie Copper for M1910	Viking338	28/12/17 10:33 PM
Re: Aussie Copper for M1910	Rothhammer1	29/12/17 05:30 PM
Re: Aussie Copper for M1910	Rule303	29/12/17 05:54 PM
Re: Aussie Copper for M1910	Viking338	29/12/17 07:40 PM
Re: Aussie Copper for M1910	Rothhammer1	29/12/17 06:06 PM
Re: Aussie Copper for M1910	DarylS	29/12/17 05:07 AM
Re: Aussie Copper for M1910	Rothhammer1	29/12/17 05:08 PM
Re: Aussie Copper for M1910	Rule303	30/12/17 09:29 PM
Re: Aussie Copper for M1910	Rothhammer1	30/12/17 10:11 PM
Re: Aussie Copper for M1910	kuduae	30/12/17 11:18 PM
Re: Aussie Copper for M1910	Rothhammer1	31/12/17 01:58 PM
Re: Aussie Copper for M1910	Rule303	31/12/17 09:48 AM
Re: Aussie Copper for M1910	DarylS	31/12/17 05:23 AM
Re: Aussie Copper for M1910	Rothhammer1	31/12/17 01:43 PM
Re: Aussie Copper for M1910	DarylS	30/12/17 04:47 AM
Re: Aussie Copper for M1910	Rothhammer1	30/12/17 03:53 PM
Re: Aussie Copper for M1910	DarylS	25/12/17 05:07 AM
Re: Aussie Copper for M1910	DarylS	25/12/17 05:25 AM
Re: Aussie Copper for M1910	paradox_	26/12/17 12:43 PM
Re: Aussie Copper for M1910	Rothhammer1	26/12/17 01:52 PM
Re: Aussie Copper for M1910	Rothhammer1	28/12/17 04:43 PM
Re: Aussie Copper for M1910	DarylS	27/12/17 05:12 AM
Re: Aussie Copper for M1910	kuduae	27/12/17 06:58 AM
Re: Aussie Copper for M1910	kuduae	27/12/17 09:48 AM
Re: Aussie Copper for M1910	Rothhammer1	27/12/17 03:23 PM
Re: Aussie Copper for M1910	paradox_	27/12/17 03:48 PM
Re: Aussie Copper for M1910	Rothhammer1	27/12/17 04:14 PM
Re: Aussie Copper for M1910	Rothhammer1	30/12/17 08:00 PM
Re: Aussie Copper for M1910	Rothhammer1	27/12/17 06:18 PM
Re: Aussie Copper for M1910	kuduae	27/12/17 09:47 PM
Re: Aussie Copper for M1910	Rothhammer1	28/12/17 05:02 PM
Re: Aussie Copper for M1910	Viking338	27/12/17 10:20 PM
Re: Aussie Copper for M1910	Rothhammer1	28/12/17 04:55 PM
Re: Aussie Copper for M1910	kuduae	27/12/17 11:57 PM
Re: Aussie Copper for M1910	Viking338	28/12/17 12:57 AM
Re: Aussie Copper for M1910	DarylS	28/12/17 04:08 AM
Re: Aussie Copper for M1910	Rothhammer1	28/12/17 05:46 PM
Re: Aussie Copper for M1910	DarylS	27/12/17 10:22 AM
Re: Aussie Copper for M1910	Waidmannsheil	25/12/17 09:12 AM
Re: Aussie Copper for M1910	paradox_	24/12/17 06:03 PM
Re: Aussie Copper for M1910	NitroX	24/12/17 09:22 PM
Re: Aussie Copper for M1910	Rothhammer1	30/12/17 07:33 PM
Re: Aussie Copper for M1910	Rothhammer1	25/12/17 03:10 PM
Re: Aussie Copper for M1910	Rothhammer1	24/12/17 08:45 PM

Extra information

0 registered and 87 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 20020

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved