Home | Ezine | Forums | Links | Contact
NitroExpress.com: 16 Bore Double Rifle

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Muzzleloaders & Blackpowder

CptCurlAdministrator
.450 member


Reged: 01/05/04
Posts: 5284
Loc: Fincastle, Botetourt County, V...
16 Bore Double Rifle
      18/11/17 11:55 PM

This week I became the owner of a 16 bore double rifle made by John Pratt of Edinburgh. Going by the address on its rib it was made before 1853.

It has 28" damascus barrels with 11 grooves. The lands are squared on top. The grooves are "U" shaped. Both bores are excellent with no pitting or other blemishes. I haven't measured its twist, but the grooves appear to make over 1/3 and just less than 1/2 revolution in the length of the barrels. I think it will measure about 60" twist. Given the number of grooves and their cross-section I believe the rifle was plainly made to shoot a round ball, which delights me.

This is my first muzzle loading double rifle. I'm sure I will learn a lot as I get to know it. There are 8 very old lead balls present in the case. I wiped off the lead oxyidation with an oily rag and plan to shoot these today. I have a modern ball mould of correct size and will fire up my lead furnace in the coming days.

It's sinful to make a post such as this without sharing some photos. I haven't had time to photograph the rifle myself, but here are a few photos from the listing by which I bought the piece.




















I will post more elegant photos when I can.

BTW, it has shot barrels also!

In the meantime, here's a question. What size percussion caps? I have some No. 11 caps. They are just a bit loose on the nipples. They will do for practice but might fall off in a hunting situation. Any suggestions?

Curl

--------------------
RoscoeStephenson.com

YOUR DOUBLE RIFLE IS YOUR BEST FRIEND.



Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 16 Bore Double Rifle CptCurlAdministrator 18/11/17 11:55 PM
. * * Re: 16 Bore Double Rifle Wayne59   19/11/17 04:53 AM
. * * Re: 16 Bore Double Rifle DarylSModerator   19/11/17 05:04 AM
. * * Re: 16 Bore Double Rifle sharps4590   19/11/17 06:38 AM
. * * Re: 16 Bore Double Rifle 93x64mm   19/11/17 09:07 AM
. * * Re: 16 Bore Double Rifle Iowa_303s   19/11/17 02:45 PM
. * * Re: 16 Bore Double Rifle BigEyeBob   21/11/17 02:39 PM
. * * Re: 16 Bore Double Rifle tinker   22/11/17 03:40 AM
. * * Re: 16 Bore Double Rifle CptCurlAdministrator   22/11/17 12:19 PM
. * * Re: 16 Bore Double Rifle CptCurlAdministrator   02/12/17 11:13 PM
. * * Re: 16 Bore Double Rifle CptCurlAdministrator   02/12/17 11:26 PM
. * * Re: 16 Bore Double Rifle Heelerau   03/12/17 10:21 AM
. * * Re: 16 Bore Double Rifle Wayne59   03/12/17 01:14 PM
. * * Re: 16 Bore Double Rifle DarylSModerator   20/02/18 08:26 AM
. * * Re: 16 Bore Double Rifle Longknife   14/03/19 01:34 AM
. * * Re: 16 Bore Double Rifle 85lc   14/03/19 05:23 AM
. * * Re: 16 Bore Double Rifle Longknife   15/03/19 01:11 AM
. * * Re: 16 Bore Double Rifle DarylSModerator   15/03/19 04:31 AM
. * * Re: 16 Bore Double Rifle tinker   04/11/19 12:03 PM
. * * Re: 16 Bore Double Rifle Heelerau   04/11/19 11:25 PM
. * * Re: 16 Bore Double Rifle Heelerau   05/12/17 09:46 AM
. * * Re: 16 Bore Double Rifle lancaster   06/12/17 06:19 AM
. * * Re: 16 Bore Double Rifle 93x64mm   06/12/17 07:21 AM
. * * Re: 16 Bore Double Rifle Chasseur   20/02/18 05:38 AM
. * * Re: 16 Bore Double Rifle DarylSModerator   20/02/18 08:01 AM
. * * Re: 16 Bore Double Rifle DarylSModerator   19/11/17 08:51 AM

Extra information
0 registered and 8 anonymous users are browsing this forum.

Moderator:  DarylS 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 11014

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved