Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Commercial Mauser Bore Codes

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Marrakai
.416 member

Reged: 09/01/03
Posts: 3591
Loc: Darwin, Top End of Australia

Re: Commercial Mauser Bore Codes
15/10/17 09:33 PM

A quick update:
started with conservative loads under the 165gr .321 projectile (for the .32 WCF or .32-40), just to be on the safe side.
Grouping with that bullet was a bit discouraging but pressure seemed low enough, so today I tried a series loaded with 150gr .323 Sierras.

Using 40 to 45gr AR2208 (Varget) all loads managed 2-inch groups or slightly better at 50 metres.

That's good enough with the original iron sights to pursue the matter further.

More to follow....

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au

Post Extras

Entire topic
Subject	Posted by	Posted on
Commercial Mauser Bore Codes	Marrakai	05/09/17 07:57 AM
Re: Commercial Mauser Bore Codes	Vladymere	05/09/17 09:29 AM
Re: Commercial Mauser Bore Codes	kuduae	06/09/17 04:07 AM
Re: Commercial Mauser Bore Codes	Marrakai	09/09/17 10:20 PM
Re: Commercial Mauser Bore Codes	Marrakai	15/10/17 09:33 PM
Re: Commercial Mauser Bore Codes	Vladymere	17/10/17 05:37 AM
Re: Commercial Mauser Bore Codes	Marrakai	27/08/18 01:12 AM

Extra information

0 registered and 48 anonymous users are browsing this forum.

Moderator: NitroX

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 6535

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact