Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: M-S 1903 Rebore

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

Carpetsahib
.333 member

Reged: 29/04/07
Posts: 435
Loc: Western NC

M-S 1903 Rebore
15/08/17 08:15 AM

I have a 1903 by Army and Navy that shoots pretty well, but has a faded and heavily worn bore. The groove diameter is approximately .268; I haven't measured the bore, but I assume it is around .262 or so. Anyhow, I am thinking about re-boring and rifling to .277, and make a 6.8/6.5x54 wildcat. This would be somewhat similar to the 6.8 Chinese cartridge, but based on a smaller diameter case.

The object of this exercise is to (hopefully) achieve a cartridge that will feed without magazine modifications. Any suggestions?

Post Extras

Entire topic
Subject	Posted by	Posted on
M-S 1903 Rebore	Carpetsahib	15/08/17 08:15 AM
Re: M-S 1903 Rebore	MikeRowe	15/08/17 08:34 AM
Re: M-S 1903 Rebore	Carpetsahib	15/08/17 09:52 AM
Re: M-S 1903 Rebore	93x64mm	15/08/17 05:58 PM
Re: M-S 1903 Rebore	Carpetsahib	15/08/17 09:35 PM
Re: M-S 1903 Rebore	Igorrock	15/08/17 11:51 PM
Re: M-S 1903 Rebore	Vladymere	16/08/17 11:53 AM
Re: M-S 1903 Rebore	Carpetsahib	16/08/17 01:12 PM
Re: M-S 1903 Rebore	2152hq	16/08/17 01:46 PM
Re: M-S 1903 Rebore	Grenadier	16/08/17 11:16 PM
Re: M-S 1903 Rebore	Carpetsahib	17/08/17 08:28 AM

Extra information

0 registered and 68 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3180

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact