Home | Ezine | Forums | Links | Contact
NitroExpress.com: Kurz Mauser

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

2152hq
.300 member


Reged: 20/05/12
Posts: 126
Loc: USA
Re: Kurz Mauser
      25/04/17 10:06 PM

Factory markings on the left outside wall of the recv'r?
If cut, shortened and welded, the markings won't match back up even to be recut through the welded area.
The distance from the front 'ring' to the thumb cut (if there is one) is shorter on the K and the factory marking starts closer to the ring and ends closer to the thumb cut because of the lack of space. I think the letter size may be different/smaller but I'm not so sure of that.

Markings can be cut by hand but magnification will usually give them away as done so. Roll stamping and stamping in general leaves a different look than graver cut or machine cut lettering.

I don't know enough (anything!) about the records of the ser#'s and what's available & what isn't to verify in that manner if it is.

I have a Mauser carbine w/a K action in 6.5cal. Certainly is a different feel to the little gem when handling it.

Just some thoughts.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Kurz Mauser MarkR 25/04/17 09:23 PM
. * * Re: Kurz Mauser 2152hq   25/04/17 10:06 PM
. * * Re: Kurz Mauser Huvius   26/04/17 01:45 AM

Extra information
0 registered and 212 anonymous users are browsing this forum.

Moderator:  NitroX 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2178

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved