Home | Ezine | Forums | Links | Contact
NitroExpress.com: 400 H&H

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Wanabebwana
.300 member


Reged: 11/01/13
Posts: 221
Loc: Canada
Re: 400 H&H
      07/03/17 08:41 AM

You can build a .416 Rigby or even a .585 Nyati on a standard '98. Doesn't mean it's the best idea even if Rigby did it.
The .400H&H neck is too long for 400gr bullets. You could not seat the bullet flush with base of the neck. Sure it should cycle very slick but it loses case capacity and will need higher pressure to equal a .416 Rem. So the Rem can be loaded at lower pressures and equal the .400 just like the Rigby will reach Rem velocities at lower pressures.
Efficiency can be found in cases with fatter bodies like the .404. This is why a .300WSM can equal the velocity and energy of a .300 Win mag with less powder. This is not the case with the .400H&H which uses the same basic case as the .416 Rem. The Rem is more like a blown out .400. My .300 H&H cannot come close to the .300WBY mag but the blown out Wby will equal H&H ballistics at much lower pressures.

The .465H&H is a different animal. The long neck allows the 480gr bullet to seat deep in the .460 Wby based case to give a COL of 3.5", more suitable to a '98 Mauser action. At 2375fps ( H&H ballistics)
it gives Lott performance with lower pressures. A classic with an advantage.

H&H Big Bores
.375 .400 .465



Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 400 H&H Ripp 25/02/17 07:54 AM
. * * Re: 400 H&H Altamaha   04/03/17 06:53 AM
. * * Re: 400 H&H Wanabebwana   06/03/17 09:50 AM
. * * Re: 400 H&H 93x64mm   06/03/17 06:43 PM
. * * Re: 400 H&H Ash   06/03/17 09:09 PM
. * * Re: 400 H&H DarylS   06/03/17 12:38 PM
. * * Re: 400 H&H Wanabebwana   06/03/17 03:44 PM
. * * Re: 400 H&H NitroXAdministrator   06/03/17 10:40 PM
. * * Re: 400 H&H DarylS   07/03/17 05:22 AM
. * * Re: 400 H&H Rell   07/03/17 12:35 AM
. * * Re: 400 H&H Altamaha   07/03/17 02:44 AM
. * * Re: 400 H&H Wanabebwana   07/03/17 08:41 AM
. * * Re: 400 H&H Grenadier   07/03/17 10:36 AM
. * * Re: 400 H&H Wanabebwana   07/03/17 11:50 AM
. * * Re: 400 H&H Grenadier   07/03/17 02:10 PM
. * * Re: 400 H&H Wanabebwana   07/03/17 04:05 PM
. * * Re: 400 H&H Grenadier   07/03/17 06:27 PM
. * * Re: 400 H&H Wanabebwana   08/03/17 02:15 AM
. * * Re: 400 H&H Grenadier   08/03/17 07:19 AM
. * * Re: 400 H&H *DELETED* Wanabebwana   08/03/17 07:41 AM
. * * Re: 400 H&H Grenadier   08/03/17 08:41 AM
. * * Re: 400 H&H NitroXAdministrator   08/03/17 02:53 PM
. * * Re: 400 H&H Well_Well_Well   08/03/17 08:12 PM
. * * Re: 400 H&H NitroXAdministrator   08/03/17 08:48 PM
. * * Re: 400 H&H Huvius   09/03/17 12:01 AM
. * * Re: 400 H&H NitroXAdministrator   09/03/17 04:19 AM
. * * Re: 400 H&H Sabbati   09/03/17 07:38 AM
. * * Re: 400 H&H Huvius   08/03/17 02:12 PM
. * * Re: 400 H&H Waidmannsheil   06/03/17 09:48 PM
. * * Re: 400 H&H Well_Well_Well   25/02/17 08:04 AM
. * * Re: 400 H&H Rule303   25/02/17 08:44 AM

Extra information
0 registered and 66 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 9965

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved