Home | Ezine | Forums | Links | Contact
NitroExpress.com: Fixing-a-custom-260-remington-bolt-action-rifle

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

DarylS
.700 member


Reged: 10/08/05
Posts: 26514
Loc: Beautiful British Columbia, Ca...
Re: Fixing-a-custom-260-remington-bolt-action-rifle
      17/12/16 02:19 PM

Yes it was.


I had a local chap put a 27" .260 Rem (rifled 4140 contoured blank - chambered long by Jeff Lawrence) on a 1950 M98 action.

I think the twist is a standard 9". I had threads put on the barrel as I received it. This long chamber fit a 7x57 necked to .264 perfectly, using a normal .26" neck. The case ended up holding 60gr. water, same as the 6.5x284, I have read. I called it the .260CLC, for Carol's Little Ctg. Yes - the CLC moniker was plagiarized by me from Layne Simpson, I believe as he named a 6mm on a .222 case, I think it was, for his daughter.

With the 60gr. capacity, this 27" bl. delivered 3,308fps using Re#19 powder and 120gr. XLC Barnes Blue Coated bullets & would put 5 of them into 3/4" - no change to the muzzle, except for re-crown.

At that time, my .264 Winchester magnum made 3,358fps with the same bullets, but used 30gr. more powder (H870) to do it. I rebarreled the .264 WM to .458 - LOL.

As the recoil generated by the .260CLC was more than enjoyable for my daughter, I had my friend set the barrel back to exactly headspace on standard .260 Rem. factory brass.

This standard .260Rem. chamber, in this splendid Laurence Barrel shoots just under, to barely over 1/2" at 100 meters, 5-shot groups with all bullets tried so far - 85gr. HP, 100gr. HP, 120gr. XLC, 140gr. Interlock. The 160gr. Sierra Semi-RNI with a mere 34.0gr. H4895 (soft recoil), can only manage to get into 1.125" 5-shot groups with me shooting.

After we found Carol could shoot it well with this load, and with the scope taped at 4X, Carol put 10 consecutive 160's into 1 1/2" with 8 of those in 1". Bench? Well sort of, elbow resting only on the concrete benchtop. It gets better, as the 'target' was a solid black deer silhouette stapled up at 100 meters (109yards) - solid black - no aiming point, no marks. She said, where do I shoot it - I said, "you know where, behind the elbow" - "just kill it, Carol" - she sure did.

Obviously, she is a natural, a talented rifle shot and, of course had to have had an exceptionally good teacher, eh!

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Fixing-a-custom-260-remington-bolt-action-rifle Ripp 17/12/16 01:10 PM
. * * Re: Fixing-a-custom-260-remington-bolt-action-rifle DarylS   17/12/16 02:19 PM
. * * Re: Fixing-a-custom-260-remington-bolt-action-rifle gryphon   17/12/16 04:11 PM
. * * Re: Fixing-a-custom-260-remington-bolt-action-rifle DarylS   17/12/16 05:31 PM
. * * Re: Fixing-a-custom-260-remington-bolt-action-rifle 93x64mm   18/12/16 08:38 AM
. * * Re: Fixing-a-custom-260-remington-bolt-action-rifle DarylS   18/12/16 10:39 AM
. * * Re: Fixing-a-custom-260-remington-bolt-action-rifle Clarkm   25/01/17 07:55 PM
. * * Re: Fixing-a-custom-260-remington-bolt-action-rifle xausa   25/01/17 11:02 PM

Extra information
0 registered and 71 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 1747

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved