Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Ruger #1 and woodleigh bullets

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

DarylS
.700 member

Reged: 10/08/05
Posts: 26992
Loc: Beautiful British Columbia, Ca...

Re: Ruger #1 and woodleigh bullets
01/12/16 05:08 AM

What do the .412's measure? Mic or measure with a good set of dial calipers to see if they are indeed, .412.

They may be .4115" and if so, or even at .412, if a new bullet fits easily into a fired case mouth, the .412's will work just fine.

Lee can make you a die as noted by 50Calshtr, however they may not list the die you want on the web site - you would have to phone and speak to the Custom Department.

We here at NE have been sizing down oversized bullets for years.

The .001" may work just fine as noted above. Start at the first suggested load in a manual and go from there. Don't reduce manual loads below their starting place.

.001" oversize is generally no problem at all, as long as the rifle's chamber neck isn't too tight for them. To have a problem with a mere .001" is highly unlikely, afterall, it is only .0005" per side.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Ruger #1 and woodleigh bullets	JD_Fowler	01/12/16 12:22 AM
Re: Ruger #1 and woodleigh bullets	Rule303	02/12/16 02:12 PM
Re: Ruger #1 and woodleigh bullets	JD_Fowler	03/12/16 02:49 AM
Re: Ruger #1 and woodleigh bullets	Rule303	03/12/16 07:48 AM
Re: Ruger #1 and woodleigh bullets	JD_Fowler	03/12/16 10:26 PM
Re: Ruger #1 and woodleigh bullets	50Calshtr	01/12/16 02:19 AM
Re: Ruger #1 and woodleigh bullets	JD_Fowler	01/12/16 04:58 AM
Re: Ruger #1 and woodleigh bullets	DarylS	01/12/16 05:08 AM
Re: Ruger #1 and woodleigh bullets	JD_Fowler	02/12/16 12:40 AM
Re: Ruger #1 and woodleigh bullets	DarylS	02/12/16 12:06 PM

Extra information

0 registered and 18 anonymous users are browsing this forum.

Moderator: Huvius

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3153

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved