Home | Ezine | Forums | Links | Contact
NitroExpress.com: Forming 9.5 x 57 brass...

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

Waidmannsheil
.400 member


Reged: 19/04/13
Posts: 2446
Loc: Melbourne Australia
Re: Forming 9.5 x 57 brass...
      11/11/16 06:29 AM

Daryl,
thanks for that. I will definitely try that method when the expander comes back from coating.
I use the Redding competition shell holders as they come in 0.002' increments and allow you to accurately adjust for headspace. Unfortunately with the older Bertram brass, which this is, Bruce did not anneal between each stage when forming the brass from a slug. He only annealed at the final stage and consequently the brass had been work hardened beyond the point where it could be softened successfully and consequently much of his earlier product would split necks even after only one or two re-loads. He now anneals between every stage and this problem seems to have gone. The brass I have is the older stock so hopefully I don't have problems.

Vlad,
I have some on order already but thank you anyway for your advice.

Waidmannsheil.

--------------------
There is nothing wrong with vegetarian food, so long as there is meat with it.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Forming 9.5 x 57 brass... AndrewS 10/11/16 06:22 AM
. * * Re: Forming 9.5 x 57 brass... Rothhammer1   13/01/17 05:43 PM
. * * Re: Forming 9.5 x 57 brass... DarylS   10/11/16 08:09 AM
. * * Re: Forming 9.5 x 57 brass... LesLeeSpeed   10/11/16 10:13 AM
. * * Re: Forming 9.5 x 57 brass... Waidmannsheil   10/11/16 10:35 AM
. * * Re: Forming 9.5 x 57 brass... LesLeeSpeed   10/11/16 02:32 PM
. * * Re: Forming 9.5 x 57 brass... Waidmannsheil   10/11/16 08:21 PM
. * * Re: Forming 9.5 x 57 brass... LesLeeSpeed   10/11/16 10:05 PM
. * * Re: Forming 9.5 x 57 brass... DarylS   11/11/16 04:58 AM
. * * Re: Forming 9.5 x 57 brass... Vladymere   11/11/16 05:30 AM
. * * Re: Forming 9.5 x 57 brass... Waidmannsheil   11/11/16 06:29 AM
. * * Re: Forming 9.5 x 57 brass... LesLeeSpeed   11/11/16 08:35 AM
. * * Re: Forming 9.5 x 57 brass... AndrewS   11/11/16 10:33 AM
. * * Re: Forming 9.5 x 57 brass... Waidmannsheil   12/11/16 07:22 AM
. * * Re: Forming 9.5 x 57 brass... Kiwi_bloke   13/11/16 06:43 PM
. * * Re: Forming 9.5 x 57 brass... Waidmannsheil   13/11/16 08:46 PM
. * * Re: Forming 9.5 x 57 brass... Waidmannsheil   11/11/16 12:25 AM
. * * Re: Forming 9.5 x 57 brass... DarylS   10/11/16 01:03 PM
. * * Re: Forming 9.5 x 57 brass... cordite   10/11/16 02:16 PM

Extra information
0 registered and 130 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 7248

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved