Home | Ezine | Forums | Links | Contact
NitroExpress.com: Forming 9.5 x 57 brass...

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

cordite
.333 member


Reged: 29/01/07
Posts: 341
Loc: NW Montana
Re: Forming 9.5 x 57 brass...
      10/11/16 02:16 PM

Just a few ideas: Always use new brass. Lube the inside of the case mouth before expanding. Expand in small increments or start with brass as close to the finished product as possible (35 whelen, 9.3x62).

If you continue to have trouble, I have had good luck fireforming with no bullet. Put about 12 grains of bullseye or other fast pistol powder in the case, put a little piece of tissue over the powder, fill remainder of case with cornmeal, top with bullet lube, crayon or wax to hold it together, NO BULLET, point gun straight up, fire. Trim to length.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Forming 9.5 x 57 brass... AndrewS 10/11/16 06:22 AM
. * * Re: Forming 9.5 x 57 brass... Rothhammer1   13/01/17 05:43 PM
. * * Re: Forming 9.5 x 57 brass... DarylS   10/11/16 08:09 AM
. * * Re: Forming 9.5 x 57 brass... LesLeeSpeed   10/11/16 10:13 AM
. * * Re: Forming 9.5 x 57 brass... Waidmannsheil   10/11/16 10:35 AM
. * * Re: Forming 9.5 x 57 brass... LesLeeSpeed   10/11/16 02:32 PM
. * * Re: Forming 9.5 x 57 brass... Waidmannsheil   10/11/16 08:21 PM
. * * Re: Forming 9.5 x 57 brass... LesLeeSpeed   10/11/16 10:05 PM
. * * Re: Forming 9.5 x 57 brass... DarylS   11/11/16 04:58 AM
. * * Re: Forming 9.5 x 57 brass... Vladymere   11/11/16 05:30 AM
. * * Re: Forming 9.5 x 57 brass... Waidmannsheil   11/11/16 06:29 AM
. * * Re: Forming 9.5 x 57 brass... LesLeeSpeed   11/11/16 08:35 AM
. * * Re: Forming 9.5 x 57 brass... AndrewS   11/11/16 10:33 AM
. * * Re: Forming 9.5 x 57 brass... Waidmannsheil   12/11/16 07:22 AM
. * * Re: Forming 9.5 x 57 brass... Kiwi_bloke   13/11/16 06:43 PM
. * * Re: Forming 9.5 x 57 brass... Waidmannsheil   13/11/16 08:46 PM
. * * Re: Forming 9.5 x 57 brass... Waidmannsheil   11/11/16 12:25 AM
. * * Re: Forming 9.5 x 57 brass... DarylS   10/11/16 01:03 PM
. * * Re: Forming 9.5 x 57 brass... cordite   10/11/16 02:16 PM

Extra information
0 registered and 81 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 6284

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved