Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Follow Up on my hand loading issues

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

Postman
.375 member

Reged: 25/09/13
Posts: 846
Loc: Canada

Re: Follow Up on my hand loading issues
17/08/16 11:27 AM

This is an interesting conundrum and similar to one which I experienced a couple of years ago with a Blaser R8 in 9.3 X 62..... The issue I experienced was that reloaded rounds simply would NOT chamber at all. A block of wood would not pound the bolt closed with any reload no matter what I tried, e.g., varied the seating depth, trimming cases to "trim to" specs, different bullet olive shapes, F/L resizing, checked case neck thickness, and even tried 3 different new die sets, all to no avail. I resigned myself to using factory loads only in this rifle until I rid myself of the rifle. When I was actually able to get a reloaded round to chamber, I experienced pressure signs

In .30-06, I had one Springfield M1A rifle with chambering issues and I resolved it by using a small base F/L resizing die to resolve the issue, which unfortunately I could not get in 9.3 X 62.....

In my mind, the first thing one should do is to F/L resize and trim, chamfer and deburr the cases, and watch one's seating depth. Seating depth is a funny thing. Jam the bullet into the lands, and pressures can spike. Seat too deeply and one can "crowd" the powder and raise pressure. The good case prep "should" solve most issues of this nature, but as I opened with, sometimes the resolution is elusive. An item to watch for is compressed powder loads. I've seen high pressure issues in a .223 when using compressed loads of Varget, even though the loads were well under "max" load.

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Follow Up on my hand loading issues	DonZ	28/06/16 12:54 PM
Re: Follow Up on my hand loading issues	Jim_C	28/06/16 02:06 PM
Re: Follow Up on my hand loading issues	DarylS	29/06/16 01:16 AM
Re: Follow Up on my hand loading issues	DarylS	07/07/16 01:18 AM
Re: Follow Up on my hand loading issues	DonZ	07/07/16 10:24 AM
Re: Follow Up on my hand loading issues	deeangeo	07/07/16 03:21 PM
Re: Follow Up on my hand loading issues	DonZ	17/07/16 12:54 PM
Re: Follow Up on my hand loading issues	DarylS	18/07/16 01:30 AM
Re: Follow Up on my hand loading issues	Tom_H	14/08/16 02:05 PM
Re: Follow Up on my hand loading issues	DonZ	15/08/16 01:17 PM
Re: Follow Up on my hand loading issues	Tom_H	16/08/16 08:37 AM
Re: Follow Up on my hand loading issues	DarylS	16/08/16 10:14 AM
Re: Follow Up on my hand loading issues	DonZ	16/08/16 11:17 PM
Re: Follow Up on my hand loading issues	ducmarc	17/08/16 10:55 AM
Re: Follow Up on my hand loading issues	ducmarc	17/08/16 11:05 AM
Re: Follow Up on my hand loading issues	Postman	17/08/16 11:27 AM
Re: Follow Up on my hand loading issues	DarylS	17/07/16 02:42 PM
Re: Follow Up on my hand loading issues	TexasJohn	17/07/16 09:58 PM
Re: Follow Up on my hand loading issues	DonZ	17/07/16 10:28 PM
Re: Follow Up on my hand loading issues	DonZ	06/07/16 12:42 PM
Re: Follow Up on my hand loading issues	deeangeo	06/07/16 04:45 PM

Extra information

1 registered and 34 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3584

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved