Home | Ezine | Forums | Links | Contact
NitroExpress.com: Loads for 375-303 -- Who Has Them?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

DarylS
.700 member


Reged: 10/08/05
Posts: 26531
Loc: Beautiful British Columbia, Ca...
Re: Loads for 375-303 -- Who Has Them?
      13/06/16 12:37 PM

leenfield - The late Paul Mathews chambered up a .375-.30/40 some time ago in a Ruger #3, calling it the .375 rimmed.
Hi Article on it, is on page 953 of "Wildcat Cartridges Volume II" - by Wolf Publishing ISBN 1-879356-18-X Copyright 1992.

He used the .30/40 case as it was slightly longer than the .303 and was more available for him. I fully understand the use of the .303 case. He simply necked the case up to .375, leaving the taper and neck length the same in this 'ALMOST' a straight case.

In a decent action, the loads should be verty close to what they'd be in a .303 opened up.

Paul's barrel length was 26".

If mine, Given a suitable action, I'd load a 295gr. Lyman mould # 375110 with 35gr. 3031 for 1,654fps, or a full power load with a 299gr. Paper Patched bullet with 46gr. IMR3031 for 2,180fps.

A 270gr. Hornady SP with 48.0gr. IMR3031 should give around 2,200fps.

Hope this helps.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Loads for 375-303 -- Who Has Them? leeenfield 13/06/16 07:48 AM
. * * Re: Loads for 375-303 -- Who Has Them? DarylS   13/06/16 12:37 PM
. * * Re: Loads for 375-303 -- Who Has Them? leeenfield   14/06/16 09:11 AM
. * * Re: Loads for 375-303 -- Who Has Them? DarylS   14/06/16 10:25 AM

Extra information
0 registered and 47 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 1316

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved