Home | Ezine | Forums | Links | Contact
NitroExpress.com: My Model 46 Husqvarna in 9.3 X 57

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

D_the_D
.224 member


Reged: 06/03/16
Posts: 45
Loc: MD, USA
Re: My Model 46 Husqvarna in 9.3 X 57
      29/04/16 07:36 AM

Quote:


I've got one of these as well but in my case the bore is pretty rough. I assume it was shot with corrosive primers at some point and not cleaned properly.

Anyway, does anyone know why these rifles suddenly appeared on the market some years back? They're clearly hunting rifles so how is it that large quantities suddenly became available for sale at roughly the same time?




A rough bore doesn't mean it won't shoot well enough for hunting. It'll just be harder to clean. Check to make sure the chamber isn't pitted though. I had one I had to rebarrel because the chamber was so bad it held on to the cases. But, for a $75 rifle, it was worth my labor and a $75 barrel. These M46 rifles were all produced before non-corrosive priming was common everywhere. They were also used in a pretty harsh environment. Hence, it didn't take intentional neglect to get corrosion started.

Sweden passed a law which only allows one to own six hunting rifles, eight pistols, or a combination of 8 of both. So people are unloading granddad's old rifle to purchase new pretty ones in super duper cartridges. Plus, Sweden has some stringent licensing and storage requirements. Like licensing restrictions, club membership, training, qualifications and such.
So people were trading them in, trying to sell, or turning them in to authorities as unwanted and there was no home market. Our Milsurp importers jumped on it.
Dennis

--------------------
Dennis
Dress the bun, not the dog. And throw away that stupid knitted doggie sweater.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* My Model 46 Husqvarna in 9.3 X 57 sharps4590 21/04/16 12:48 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 DarylS   21/04/16 12:56 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 sharps4590   21/04/16 01:55 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 Iowa_303s   21/04/16 09:17 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 Homer   21/04/16 06:46 PM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 sharps4590   21/04/16 09:50 PM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 DarylS   22/04/16 01:36 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 D_the_D   22/04/16 03:25 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 Iowa_303s   22/04/16 03:36 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 sharps4590   22/04/16 06:54 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 DarylS   23/04/16 02:22 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 sharps4590   23/04/16 07:01 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 lancaster   24/04/16 08:21 PM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 sharps4590   28/04/16 03:15 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 DarylS   28/04/16 12:43 PM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 sharps4590   28/04/16 09:36 PM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 lonewulf   28/04/16 11:56 PM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 D_the_D   29/04/16 07:36 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 Igorrock   29/04/16 12:53 PM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 D_the_D   29/04/16 01:02 PM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 sharps4590   29/04/16 08:21 PM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 Igorrock   29/04/16 11:13 PM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 sharps4590   30/04/16 02:14 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 DarylS   30/04/16 02:26 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 Wanabebwana   08/06/16 10:21 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 sharps4590   10/06/16 09:58 PM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 DarylS   11/06/16 12:43 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 sharps4590   11/06/16 06:13 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 DarylS   11/06/16 08:26 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 sharps4590   11/06/16 07:37 PM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 DarylS   12/06/16 02:15 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 sharps4590   12/06/16 09:42 PM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 DarylS   13/06/16 12:23 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 sharps4590   19/06/16 09:29 PM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 sharps4590   30/04/16 02:46 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 D_the_D   30/04/16 05:19 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 sharps4590   30/04/16 06:41 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 D_the_D   30/04/16 10:19 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 DarylS   30/04/16 10:55 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 DarylS   30/04/16 02:04 PM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 D_the_D   30/04/16 03:52 PM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 sharps4590   30/04/16 09:47 PM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 DarylS   01/05/16 12:24 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 sharps4590   01/05/16 02:16 AM
. * * Re: My Model 46 Husqvarna in 9.3 X 57 DarylS   29/04/16 12:31 AM

Extra information
1 registered and 66 anonymous users are browsing this forum.

Moderator:  NitroX 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 15157

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved