Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: My Model 46 Husqvarna in 9.3 X 57

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Iowa_303s
.400 member

Reged: 22/03/13
Posts: 1016
Loc: Iowa, USA

Re: My Model 46 Husqvarna in 9.3 X 57
21/04/16 09:17 AM

Shraps,
Thanks for the kind words. This forum is all about helping each others knowledge base grow. Just doing my part to help out.
By my calculations, your case neck wall thickness is .012" (using minimum dimensions as you stated above.
Neck turning .002" per side (.004" off diameter) should give you adaquate clearance for a .369-.370" diameter cast bullet.
The cases I use are Prvi 8x57 that I neck up to 9.3mm. This leaves the case neck .010" thick. This works ok for my 46A with its .368 bore and .393" chamber neck.
Both of my M46's have .370" bores. This does not allow for bullet release with a .372" bullet.

--------------------
Matt

formerly known as Iowa_303

"Once your reputation is ruined you can live your life quite freely."

"Enkelkinder über alles"

Edited by Iowa_303 (21/04/16 11:38 AM)

Post Extras

Entire topic
Subject	Posted by	Posted on
My Model 46 Husqvarna in 9.3 X 57	sharps4590	21/04/16 12:48 AM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	21/04/16 12:56 AM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	21/04/16 01:55 AM
Re: My Model 46 Husqvarna in 9.3 X 57	Iowa_303s	21/04/16 09:17 AM
Re: My Model 46 Husqvarna in 9.3 X 57	Homer	21/04/16 06:46 PM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	21/04/16 09:50 PM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	22/04/16 01:36 AM
Re: My Model 46 Husqvarna in 9.3 X 57	D_the_D	22/04/16 03:25 AM
Re: My Model 46 Husqvarna in 9.3 X 57	Iowa_303s	22/04/16 03:36 AM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	22/04/16 06:54 AM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	23/04/16 02:22 AM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	23/04/16 07:01 AM
Re: My Model 46 Husqvarna in 9.3 X 57	lancaster	24/04/16 08:21 PM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	28/04/16 03:15 AM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	28/04/16 12:43 PM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	28/04/16 09:36 PM
Re: My Model 46 Husqvarna in 9.3 X 57	lonewulf	28/04/16 11:56 PM
Re: My Model 46 Husqvarna in 9.3 X 57	D_the_D	29/04/16 07:36 AM
Re: My Model 46 Husqvarna in 9.3 X 57	Igorrock	29/04/16 12:53 PM
Re: My Model 46 Husqvarna in 9.3 X 57	D_the_D	29/04/16 01:02 PM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	29/04/16 08:21 PM
Re: My Model 46 Husqvarna in 9.3 X 57	Igorrock	29/04/16 11:13 PM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	30/04/16 02:14 AM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	30/04/16 02:26 AM
Re: My Model 46 Husqvarna in 9.3 X 57	Wanabebwana	08/06/16 10:21 AM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	10/06/16 09:58 PM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	11/06/16 12:43 AM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	11/06/16 06:13 AM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	11/06/16 08:26 AM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	11/06/16 07:37 PM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	12/06/16 02:15 AM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	12/06/16 09:42 PM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	13/06/16 12:23 AM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	19/06/16 09:29 PM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	30/04/16 02:46 AM
Re: My Model 46 Husqvarna in 9.3 X 57	D_the_D	30/04/16 05:19 AM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	30/04/16 06:41 AM
Re: My Model 46 Husqvarna in 9.3 X 57	D_the_D	30/04/16 10:19 AM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	30/04/16 10:55 AM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	30/04/16 02:04 PM
Re: My Model 46 Husqvarna in 9.3 X 57	D_the_D	30/04/16 03:52 PM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	30/04/16 09:47 PM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	01/05/16 12:24 AM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	01/05/16 02:16 AM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	29/04/16 12:31 AM

Extra information

0 registered and 19 anonymous users are browsing this forum.

Moderator: NitroX

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 15958

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact