Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Merkel 140 Stock Removal

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

aromakr
.375 member

Reged: 20/04/11
Posts: 849
Loc: Hamilton, Montana

Re: Merkel 140 Stock Removal
09/04/16 04:38 AM

Since there are no side plates, you will need to remove the trigger bow screws, lift the bow out of the inletting, then remove the butt plate or recoil pad and remove the thru stock bolt. It probably has a hex head bolt that will come out with a socket with extension and rachet. Not sure it its SAE or metric. Having not had a merkel in my hands, I'm not sure if any other screws need removing, but carful examination of the rifle should reveal that. Any screw that appears to go into the wood should be removed.
Bob

Post Extras

Entire topic
Subject	Posted by	Posted on
Merkel 140 Stock Removal	TOBY458	08/04/16 11:23 AM
Re: Merkel 140 Stock Removal	Postman	08/04/16 01:35 PM
Re: Merkel 140 Stock Removal	Igorrock	08/04/16 05:24 PM
Re: Merkel 140 Stock Removal	TOBY458	09/04/16 12:35 AM
Re: Merkel 140 Stock Removal	Igorrock	09/04/16 03:50 AM
Re: Merkel 140 Stock Removal	aromakr	09/04/16 04:38 AM
Re: Merkel 140 Stock Removal	TOBY458	09/04/16 11:15 PM
Re: Merkel 140 Stock Removal	Igorrock	09/04/16 11:36 PM
Re: Merkel 140 Stock Removal	TOBY458	11/04/16 01:41 AM
Re: Merkel 140 Stock Removal	TOBY458	12/04/16 01:03 AM

Extra information

0 registered and 171 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2010

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact