Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Questions about adding lead to the stock--

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Eric
.224 member

Reged: 28/06/04
Posts: 45
Loc: Wisconsin, USA

Re: Questions about adding lead to the stock--
17/03/05 03:42 AM

Chris; Just take the pad off and see how the lead was installed in the butt. It is possible you can put epoxy around the lead in the forend and butt and glue it in place. Make sure it comes level to the butt and it should not be able to shift around. Use modeling clay and build the area of magazine box and trigger inlet. I would use a short screw section or key stock for the new web and build it up with agraglass and steel wool or steel bed from Brownells'. They re-inlet for the magazine box and trigger with a dremel tool rougher and then files untill you have clearence and a good fit. Good luck with stocking. Eric

Post Extras

Entire topic
Subject	Posted by	Posted on
Questions about adding lead to the stock--	csutton7	16/03/05 10:38 PM
Re: Questions about adding lead to the stock--	510Wells	17/03/05 12:35 PM
Re: Questions about adding lead to the stock--	Eric	17/03/05 03:42 AM
Re: Questions about adding lead to the stock--	csutton7	17/03/05 10:08 AM
Re: Questions about adding lead to the stock--	new_guy	17/03/05 12:51 PM
Re: Questions about adding lead to the stock--	csutton7	17/03/05 05:45 PM
Re: Questions about adding lead to the stock--	atkinson6	30/03/05 06:37 AM
Re: Questions about adding lead to the stock--	csutton7	30/03/05 12:55 PM

Extra information

0 registered and 115 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2137

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact