Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Scope mounts for cadet barreled martini

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

DarylS
.700 member

Reged: 10/08/05
Posts: 27736
Loc: Beautiful British Columbia, Ca...

Re: Scope mounts for cadet barreled martini
25/02/16 04:27 AM

I drilled and tapped one screw hole on the barrel boss just ahead of the receiver ring and one in the 'blank' drifted into the raised rear sight boss of the CZ Hornet barrel I screwed into the action. I used a Weaver base, drilled a new hole as necessary. IIRC - I used 8x40's because there was only two of them - that was for the .22 Hornet.

On the .17HMR, I drilled and tapped 3, 6x40 holes into the barrel, in a flute, again using a Weaver base.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Entire topic
Subject	Posted by	Posted on
Scope mounts for cadet barreled martini	CAMartini	24/02/16 04:13 PM
Re: Scope mounts for cadet barreled martini	DoubleD	24/02/16 04:53 PM
Re: Scope mounts for cadet barreled martini	DarylS	25/02/16 04:27 AM
Re: Scope mounts for cadet barreled martini	VonGruff	25/02/16 06:14 AM
Re: Scope mounts for cadet barreled martini	CAMartini	27/02/16 04:54 PM
Re: Scope mounts for cadet barreled martini	NitroX	27/02/16 06:28 PM
Re: Scope mounts for cadet barreled martini	DoubleD	27/02/16 08:42 PM

Extra information

2 registered and 33 anonymous users are browsing this forum.

Moderator: Huvius

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 4047

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact