Home | Ezine | Forums | Links | Contact
NitroExpress.com: Problem Tang Screw

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

Ed
.224 member


Reged: 31/08/14
Posts: 10
Loc: Upstate NY, USA
Re: Problem Tang Screw
      12/02/16 08:39 AM

Not to belabor the point but what I am looking at is that the elevation of the ferrule is lower than the inletted part of the stock at the rear of the trigger assembly. The ferrule is not loose. I shimmed the stock at the lower elevation to match the higher part so as not to spring the assembly down to meet the ferrule. Either the ferrule was not done correctly to begin with or the inletting of the stock to the rear of the trigger was wrong. Have not been to the range yet to see if this helps or not yet. I will end up taking the rifle to a gunsmith to have him correct the bedding problem.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Problem Tang Screw Ed 10/02/16 08:47 AM
. * * Re: Problem Tang Screw casper50   10/02/16 09:16 AM
. * * Re: Problem Tang Screw Ed   10/02/16 10:21 AM
. * * Re: Problem Tang Screw DarylS   10/02/16 11:13 AM
. * * Re: Problem Tang Screw Ed   10/02/16 12:25 PM
. * * Re: Problem Tang Screw MikeRowe   10/02/16 02:07 PM
. * * Re: Problem Tang Screw Ed   10/02/16 10:44 PM
. * * Re: Problem Tang Screw szihn   11/02/16 08:08 AM
. * * Re: Problem Tang Screw Ed   11/02/16 08:41 AM
. * * Re: Problem Tang Screw DarylS   11/02/16 10:24 AM
. * * Re: Problem Tang Screw szihn   11/02/16 01:27 PM
. * * Re: Problem Tang Screw Ed   11/02/16 10:06 PM
. * * Re: Problem Tang Screw Ed   12/02/16 12:00 AM
. * * Re: Problem Tang Screw szihn   12/02/16 12:22 AM
. * * Re: Problem Tang Screw Igorrock   12/02/16 02:30 AM
. * * Re: Problem Tang Screw DarylS   12/02/16 03:41 AM
. * * Re: Problem Tang Screw Ed   12/02/16 08:39 AM
. * * Re: Problem Tang Screw Igorrock   12/02/16 10:22 AM
. * * Re: Problem Tang Screw DarylS   12/02/16 11:14 AM
. * * Re: Problem Tang Screw Ed   12/02/16 12:03 PM
. * * Re: Problem Tang Screw Igorrock   13/02/16 03:16 AM
. * * Re: Problem Tang Screw Ed   13/02/16 04:30 AM

Extra information
1 registered and 106 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 6590

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved