Home | Ezine | Forums | Links | Contact
NitroExpress.com: Ordered a Husqvarna 46 today.

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

DarylS
.700 member


Reged: 10/08/05
Posts: 26526
Loc: Beautiful British Columbia, Ca...
Re: Ordered a Husqvarna 46 today.
      07/01/16 04:12 AM

As to bullets, my M46 in 9.3x57, with 3-9X M3200 scope & bagged, shot under 1" at 100 meters with all bullet weights. I shot Norma's Vulcan in 232gr., sized down 225gr. and 235gr. .375" Speers, 270gr. Speer(too soft(imho), 285gr. Privi RN, 293gr. TUG and sized down 300gr. RN .375" Hornady. The .375's were sized down, drawn, to .367" which was the largest size my rifle would allow in the chamber. The rifle was over sized at a .370" groove diameter.

I drove the 225gr. at 2,550fps, the 232's at 2,450fps (same load), 270's at 2,300fps, 285gr. & 293gr. at 2,200fps and the 300gr. RN's at 2,175fps. THOSE would also be a good, all round load for this rifle.

2,175fps was the original 9.3x62 factory load for both softs and solids in 286gr. weight, as noted by John Taylor in "African Rifle's and Cartridges for the 286gr. bullets.

This, BTW, is the load that gained the 9.3x62's reputation in Africa. John Taylor wrote that the increase in speed for the 9.3x62 in 1923 or so, was unnecessary as it worked perfectly at 2,175fps.

I didn't get around to testing the 286gr. Hornady SP, but that is the bullet I'd probably have settled on for everything. I'm sure my rifle's propensity for shooting under an inch with everything, would still hold with the Hornadys.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Ordered a Husqvarna 46 today. mart 06/01/16 05:49 PM
. * * Re: Ordered a Husqvarna 46 today. Iowa_303s   06/01/16 07:00 PM
. * * Re: Ordered a Husqvarna 46 today. Viking338   06/01/16 08:02 PM
. * * Re: Ordered a Husqvarna 46 today. DarylS   07/01/16 04:12 AM
. * * Re: Ordered a Husqvarna 46 today. mart   07/01/16 04:36 AM

Extra information
0 registered and 44 anonymous users are browsing this forum.

Moderator:  NitroX 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2557

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved