Home | Ezine | Forums | Links | Contact
NitroExpress.com: anyone know of a source for 10.75x68?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

kuduae
.400 member


Reged: 13/01/10
Posts: 1792
Loc: middle of Germany
Re: anyone know of a source for 10.75x68?
      20/12/15 06:24 AM

Quote:

Ii might just get it rechamberred to 404 for ease of ammunition.



That's not as easy as you may think. Merely rechambering is not sufficient. You have to open up the bolt face too. Further, the Mauser, Oberndorf Commercial 10.75x68 action and magazine must be opened up to work with the longer and fatter .404 cartridge. The 10.75x68 has a CIP max cartridge over all length of 81 mm = 3.19", Mauser mags for this cartridge had an inside length of 84 mm = 3.3". This is insufficient for the .404 with it's max oal of 89.76 mm = 3.53". Mauser .404 magazines on their Magnum actions were 92 mm = 3.62" long.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* anyone know of a source for 10.75x68? Gundog01 18/12/15 02:22 PM
. * * Re: anyone know of a source for 10.75x68? kuduae   20/12/15 06:24 AM
. * * Re: anyone know of a source for 10.75x68? eagle27   20/12/15 07:29 AM
. * * Re: anyone know of a source for 10.75x68? Gundog01   20/12/15 10:30 AM
. * * Re: anyone know of a source for 10.75x68? kuduae   20/12/15 08:52 AM
. * * Re: anyone know of a source for 10.75x68? eagle27   20/12/15 02:33 PM
. * * Re: anyone know of a source for 10.75x68? m4220   20/12/15 09:13 AM
. * * Re: anyone know of a source for 10.75x68? eagle27   20/12/15 02:51 PM
. * * Re: anyone know of a source for 10.75x68? m4220   20/12/15 03:07 PM
. * * Re: anyone know of a source for 10.75x68? lancaster   20/12/15 04:23 PM
. * * Re: anyone know of a source for 10.75x68? eagle27   20/12/15 04:51 PM
. * * Re: anyone know of a source for 10.75x68? korv   20/12/15 07:59 PM
. * * Re: anyone know of a source for 10.75x68? jgrabow   21/12/15 06:35 AM
. * * Re: anyone know of a source for 10.75x68? Gundog01   02/01/16 04:09 AM
. * * Re: anyone know of a source for 10.75x68? kuduae   02/01/16 06:14 AM
. * * Re: anyone know of a source for 10.75x68? 93x64mm   02/01/16 08:34 AM
. * * Re: anyone know of a source for 10.75x68? Gundog01   02/01/16 03:45 PM
. * * Re: anyone know of a source for 10.75x68? LesLeeSpeed   18/12/15 05:08 PM
. * * Re: anyone know of a source for 10.75x68? Gen_Hicks   18/12/15 06:05 PM
. * * Re: anyone know of a source for 10.75x68? rglenz   19/12/15 01:03 AM
. * * Re: anyone know of a source for 10.75x68? jgrabow   19/12/15 01:55 AM
. * * Re: anyone know of a source for 10.75x68? Gundog01   19/12/15 02:29 AM
. * * Re: anyone know of a source for 10.75x68? jgrabow   19/12/15 04:10 AM
. * * Re: anyone know of a source for 10.75x68? Gundog01   19/12/15 05:18 AM
. * * Re: anyone know of a source for 10.75x68? jgrabow   19/12/15 07:40 AM
. * * Re: anyone know of a source for 10.75x68? Rule303   19/12/15 11:09 AM
. * * Re: anyone know of a source for 10.75x68? eagle27   19/12/15 02:12 PM
. * * Re: anyone know of a source for 10.75x68? Rule303   19/12/15 03:16 PM
. * * Re: anyone know of a source for 10.75x68? Gundog01   19/12/15 09:16 AM

Extra information
0 registered and 364 anonymous users are browsing this forum.

Moderator:  NitroX 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 19102

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved