Home | Ezine | Forums | Links | Contact
NitroExpress.com: .350 Magnum Rigby-Mauser

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

eagle27
.400 member


Reged: 24/01/09
Posts: 1165
Loc: Rolleston, Christchurch, New Z...
Re: .350 Magnum Rigby-Mauser
      05/12/15 12:01 PM

Yes your bolt has been set up for a rimmed cartridge by the look of it and the extractor blade will be hardly long enough (looks short in the photo) to enter the case head extractor groove and grab the rim of the rimless 350 Magnum case, hence probably the reason it has broken some of the blade off.
My Mauser bolt face shown below has been opened up from the smaller 10.75 Mauser rimless for the larger 404 Jeffery case which also being rimless did not need any alteration to the extractor other than stoning the blade toe a bit to allow a cartridge head to feed up onto the bolt face behind the blade.



Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* .350 Magnum Rigby-Mauser jgrabow 05/12/15 03:26 AM
. * * Re: .350 Magnum Rigby-Mauser m4220   05/12/15 09:54 AM
. * * Re: .350 Magnum Rigby-Mauser Huvius   05/12/15 11:37 AM
. * * Re: .350 Magnum Rigby-Mauser eagle27   05/12/15 12:01 PM
. * * Re: .350 Magnum Rigby-Mauser Wanabebwana   05/12/15 02:23 PM
. * * Re: .350 Magnum Rigby-Mauser jgrabow   06/12/15 02:03 AM
. * * Re: .350 Magnum Rigby-Mauser m4220   06/12/15 04:44 AM
. * * Re: .350 Magnum Rigby-Mauser jgrabow   06/12/15 06:38 AM
. * * Re: .350 Magnum Rigby-Mauser m4220   06/12/15 07:04 AM
. * * Re: .350 Magnum Rigby-Mauser Huvius   06/12/15 09:34 AM
. * * Re: .350 Magnum Rigby-Mauser jgrabow   06/12/15 02:21 AM
. * * Re: .350 Magnum Rigby-Mauser casper50   05/12/15 05:34 AM
. * * Re: .350 Magnum Rigby-Mauser jgrabow   05/12/15 06:28 AM
. * * Re: .350 Magnum Rigby-Mauser casper50   05/12/15 07:32 AM

Extra information
0 registered and 40 anonymous users are browsing this forum.

Moderator:  NitroX 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 4671

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved