Home | Ezine | Forums | Links | Contact
NitroExpress.com: 416 Ruger loads

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

gundog
.275 member


Reged: 16/10/10
Posts: 58
Loc: Victoria, Australia
Re: 416 Ruger loads
      06/11/15 07:11 PM

I emailed ADI, asking for load data & their response was "We don't have any. We checked with sources in the US & there's none there either". They then recommended I contact Woodleigh bullets, as there may be some data in their reloading manual.
Frankly, I find this bizarre. This round has been out for at least 5 years or thereabouts & no data!!
A friend of mine is using 73gn 2208 behind a 400gn TSX & wants to use the 350gn Swift A frames, hence the enquiry. I looked at the 416 RM data with the same powder & it goes from a starting load of 76gn to a listed max load of 82gn. I suggested he could start at 75gn & go from there. Any thoughts?

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 416 Ruger loads gundog 05/11/15 07:58 PM
. * * Re: 416 Ruger loads DarylS   06/11/15 04:04 AM
. * * Re: 416 Ruger loads Ripp   06/11/15 04:40 AM
. * * Re: 416 Ruger loads DarylS   06/11/15 05:22 AM
. * * Re: 416 Ruger loads gundog   06/11/15 07:11 PM
. * * Re: 416 Ruger loads eagle27   06/11/15 07:46 PM
. * * Re: 416 Ruger loads DarylS   07/11/15 03:18 AM
. * * Re: 416 Ruger loads gundog   08/11/15 09:30 AM
. * * Re: 416 Ruger loads coll416   03/01/16 09:47 PM
. * * Re: 416 Ruger loads DarylS   04/01/16 05:04 AM
. * * Re: 416 Ruger loads gundog   25/01/16 01:01 PM
. * * Re: 416 Ruger loads eagle27   08/11/15 05:09 PM
. * * Re: 416 Ruger loads DarylS   08/11/15 11:26 AM

Extra information
0 registered and 23 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 7085

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved