Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Action screws tightening force for a regular mauser m98?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

DarylS
.700 member

Reged: 10/08/05
Posts: 26941
Loc: Beautiful British Columbia, Ca...

Re: Action screws tightening force for a regular mauser m98?
20/07/15 12:29 AM

Many Mausers appreciate about 1/2" to 1" of bedding ahead of the front action ring on the shank. The bottom of the recoil lug should not be contacting bedding material, thus the action can be drawn down hard against the flat behind the lug. The the sides nor the front should be in contact, either. This was taught to me by the accuracy shooters I played with back in the 70's - when many of us used 98's (mostly VZ's) for our match actions. The sides have some taper and this can cause unwanted wedging. The top side surface of the action can be a snug fit through a 'ring' of bedding around the action. The tank should also be bed to that area. there are mixed feelings about the rear surface of the tang. Some feel it should be not bedded hard, while others demand it. The loose crowd think if the rear of the tang is bed to the stock, this does not allow movement and will split the wrist. The others feel if the action is properly bed at the recoil lug, it cannot and must not move - I belong to that crowd and have never split a wrist behind the tang.
The extractor should have a couple thou clearance to the barrel's rear surface, imho. The barrel should bottom against the inner ring. This is what I was taught.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Action screws tightening force for a regular mauser m98?	JPBojinov	21/05/15 06:57 AM
Re: Action screws tightening force for a regular mauser m98?	Huvius	21/05/15 10:02 AM
Re: Action screws tightening force for a regular mauser m98?	DarylS	21/05/15 12:04 PM
Re: Action screws tightening force for a regular mauser m98?	DoubleD	21/05/15 12:17 PM
Re: Action screws tightening force for a regular mauser m98?	Ripp	20/07/15 01:32 AM
Re: Action screws tightening force for a regular mauser m98?	OT3	04/08/15 03:30 PM
Re: Action screws tightening force for a regular mauser m98?	JPBojinov	12/08/15 08:18 PM
Re: Action screws tightening force for a regular mauser m98?	JPBojinov	21/05/15 05:24 PM
Re: Action screws tightening force for a regular mauser m98?	JPBojinov	13/07/15 09:22 PM
Re: Action screws tightening force for a regular mauser m98?	VonGruff	14/07/15 02:52 PM
Re: Action screws tightening force for a regular mauser m98?	JPBojinov	14/07/15 04:36 PM
Re: Action screws tightening force for a regular mauser m98?	JPBojinov	19/07/15 09:07 PM
Re: Action screws tightening force for a regular mauser m98?	DarylS	20/07/15 12:29 AM

Extra information

1 registered and 32 anonymous users are browsing this forum.

Moderator: NitroX

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 4985

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved