Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Scope ring hardening

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

Tom_H
.333 member

Reged: 13/04/05
Posts: 336
Loc: Southeast, NY

Scope ring hardening
17/07/15 09:26 PM

The job is almost finished. Last weekend I cut mounts and rings so that they would specifically fit the rib. Drop the scope on the rib, push forward, and the scope is on.

The forward mount has a mechanical stop in the front but still working on a locking system to keep it from sliding off the back.

Probably going to be a dovetailed leaf spring with detent in the front ring.

My problem is hardening them so that they don't wear out.
If I go the spring route it will drag on the ring and eventually wear a slot in the top. My guess is that I have to harden rings, bases, and whatever I use to lock it in so that things don't beat each other up.

Any thoughts on how to approach this would be appreciated.

Tom

--------------------
Carbonation without fermentation is tyranny

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Scope ring hardening	Tom_H	17/07/15 09:26 PM
Re: Scope ring hardening	Birdhunter50	17/07/15 10:28 PM

Extra information

0 registered and 82 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 771

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved