Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: YAFFQ "Yet Another Freakin' Filler Question"

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

AbitNutz
.275 member

Reged: 02/09/12
Posts: 58
Loc: Ohio, USA

Re: YAFFQ "Yet Another Freakin' Filler Question"
23/05/15 07:47 PM

Can you provide a source about that? Not trying to be difficult but all I can find is that it's not necessary because it's easily ignitable.

I found a couple of posts from another sight talking about this issue.

They wrote the following:
1) If you really really inquire of Accurate they will tell you that they do not recommend the use of fillers with 5744 because they have never tested their powder with fillers.

However, an answering post from the same sight wrote:
2)I had an email this afternoon from Accurate and they now say a filler is acceptable with XMP5744.

From Accurate's sight:

It can best be described as a fast burning Rifle or slow burning Magnum handgun double base “hybrid” powder, having the typical chemical composition of handgun powders i.e. 20% NG – and the geometry of a typical extruded single perforated rifle powder.

Rifle applications:

This makes the powder very ignitable, which makes it ideal for low loading density applications, such as reduced loads on bottle neck rifle calibers, and low performance “straight case” designs, such as the old “black powder” calibers i.e. 45-70 45-110 50-110 etc.

The powder is virtually insensitive to powder position, and there is no need for “fillers”. It will deliver consistent results at low performance levels. Although there will be some un-burnt powder (see paragraph below) the performance will remain consistent.

Due to its ignitability, any strength rifle primer can be used.

Edited by AbitNutz (23/05/15 08:17 PM)

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
YAFFQ "Yet Another Freakin' Filler Question"	AbitNutz	15/05/15 05:11 AM
Re: YAFFQ "Yet Another Freakin' Filler Question"	Huvius	15/05/15 06:26 AM
Re: YAFFQ "Yet Another Freakin' Filler Question"	AbitNutz	15/05/15 06:53 AM
Re: YAFFQ "Yet Another Freakin' Filler Question"	DarylS	15/05/15 10:35 AM
Re: YAFFQ "Yet Another Freakin' Filler Question"	AbitNutz	15/05/15 10:41 PM
Re: YAFFQ "Yet Another Freakin' Filler Question"	kuduae	16/05/15 01:12 AM
Re: YAFFQ "Yet Another Freakin' Filler Question"	AbitNutz	16/05/15 03:50 AM
Re: YAFFQ "Yet Another Freakin' Filler Question"	NitroX	17/05/15 11:29 PM
Re: YAFFQ "Yet Another Freakin' Filler Question"	albertan	19/05/15 02:19 PM
Re: YAFFQ "Yet Another Freakin' Filler Question"	NitroX	19/05/15 09:47 PM
Re: YAFFQ "Yet Another Freakin' Filler Question"	AbitNutz	23/05/15 04:51 AM
Re: YAFFQ "Yet Another Freakin' Filler Question"	AkMike	23/05/15 01:18 PM
Re: YAFFQ "Yet Another Freakin' Filler Question"	AbitNutz	23/05/15 07:47 PM
Re: YAFFQ "Yet Another Freakin' Filler Question"	Marrakai	24/05/15 10:49 AM
Re: YAFFQ "Yet Another Freakin' Filler Question"	Huvius	24/05/15 01:22 PM
Re: YAFFQ "Yet Another Freakin' Filler Question"	AkMike	24/05/15 05:10 PM
Re: YAFFQ "Yet Another Freakin' Filler Question"	AbitNutz	25/05/15 01:39 AM
Re: YAFFQ "Yet Another Freakin' Filler Question"	AkMike	25/05/15 03:58 PM
Re: YAFFQ "Yet Another Freakin' Filler Question"	AbitNutz	27/05/15 01:37 AM
Re: YAFFQ "Yet Another Freakin' Filler Question"	Huvius	27/05/15 02:16 AM
Re: YAFFQ "Yet Another Freakin' Filler Question"	AbitNutz	27/05/15 03:49 AM
Re: YAFFQ "Yet Another Freakin' Filler Question"	albertan	28/05/15 07:54 AM

Extra information

3 registered and 202 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 7723

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved